Print Version

I-7188EXD-MTCP

Description:
The I-7188XG is an embedded controller and powered by an 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. It provides one serial RS-232/RS-485 port(Jumper Selectable) and one RS-485 port. The I-7188XG also supports an optional battery back-up SRAM expansion board and Flash-Rom board, providing non-volatile mass storage from 2 megabytes to 64 megabytes.

Features of default Modbus firmware
When you buy an I-7188E -MTCP controller, it already has the default Modbus firmware installed in Flash memory. The default firmware has the follows features:

  • Converters single Modbus/TCP to multi Modbus/RTU
    The I-7188E -MTCP is a Modbus/TCP gateway. It can easily upgrade many Modbus/RTU devices to have Ethernet communication ability.


  • Supports VxComm technique for every COM port of controllers
    If serial devices don't support Modbus/RTU, you can still access these devices. But need to install VxComm driver on host PCs and assign a COM port number to link to the remote COM port (of I-7188E -MTCP). After that, serial clients can access these remote serial devices via standard RS-232 functions.


  • Allowed multi-client (or master) access simultaneously
    Different I-7188E -MTCP controller supports different client numbers connect to.


  • Firmware modifiable
    We provide the Modbus SDK allowing users to develop their custom Modbus firmware.


    • Price:
    579$

    Supplier:
    ICPDAS USA
    Specifications: