Acquisition & Contrôle | interface | PCI-COM422/485
PCI-COM422/485 is a single port RS-422/485 interface
Features:
- Low Cost RS-422/485 Full Duplex interface port
- PCI bus 2.1 compliant
- Control signals provided: RTS and CTS.
- Speeds to 460.8 Kbps
- 16C550 UART with 16-byte FIFO standard
- Optional 16C750 UART with 64-byte FIFO
- 9 Position D-type connector
- Optional surge suppression on each signal line
Specifications:
Serial ports: 1
Configured: Address and interrupt configured through PCI BIOS and supplied drivers
Transceivers: Full Duplex SP490-type transceiver meeting RS-422 standards to 5Mbps
Max. baud rate: to 460.8 Kbps, software selectable per channel for 115.2, 230.4, or 460.8Kbps
Serial modes: 5, 6, 7, or 8 data bits odd, even or no parity 0, 1 or 2 stop bits
UART: 16C550 standard
Termination: 120 ohm termination resistor provided
Connector: DB-9 male
Form Factor:
PCI 2.1 complaint
Software Description:
Drivers for Windows 95, 98, NT, 2000, and XP supplied
Spécifications:
Serial ports
1
Configured
Address and interrupt configured through PCI BIOS and supplied drivers
Transceivers
Full Duplex SP490-type transceiver meeting RS-422 standards to 5Mbps
Max. baud rate
to 460.8 Kbps, software selectable per channel for 115.2, 230.4, or 460.8Kbps
Serial modes
5, 6, 7, or 8 data bits odd, even or no parity 0, 1 or 2 stop bits
UART
16C550 standard
Termination
120 ohm termination resistor provided
Connector
DB-9 male
Nous tenons à ce que votre expérience de navigation sur note site soit agréable & productive. Pour toute question technique, nos représentants se feront un plaisir de vous guider pour un choix éclairé et approprié à vos besoins.
En visitant notre site, indiquez les produits qui suscitent votre intérêt en cliquant sur ajouter à mes interêts.
Besoin d'une solution ?
Nous pouvons vous apporter la réponse !