Automation Industrielle | i-87K modules sériels
I-87013-G
32-channel Isolated Digital Input Module FEATURES: I-87013 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87013 is a 4 Channel RTD Input Module with 8 channels. I-87013 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Input Channels: 4 Input Type: Pt, Ni Sampling rate: 10 samples/sec Bandwidth: 4 Hz Wire connection: 2/3/4 Accuracy: +/- 0.05% or better Zero drift: +/-0.3?V/ ?J CMR @ 50/60 Hz: 92 dB min. NMR @ 50/60 Hz: 100 dB Span drift: +/- 25 ppm/?J Power Consumption:3W
$609.00
I-87016-G
2-channel Isolated Strain Gauge Input Module FEATURES: I-87016 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87016 is an Isolated Strain Gauge Input Module with 2 channels. I-87016 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: 2 Only one channel is available at a time Analog Input Type : mV, V, mA Sampling Rate: 10 Samples/Second Resolution: 16-bits Bandwidth: 5.24Hz Accuracy: ?0.05% FSR Zero Drift: ?0.5?V/ ?C Span Drift: 25ppm/?C CMR @ 50/60Hz: 150dB NMR @ 50/60Hz: 100dB Input Impedance: 20M Ohms Isolation: 3000V rms Digital Output Channels: 4 Open Collector to 30V Output Load: sink 30mA max Power Dissipation: 30mW Digital Input Channels: 1 Logic Level 0: +1V max Logic Level 1: +3.5 to 30V Event Counter Max Input Frequency: 50Hz # Min. Pulse Width: 1mS Power Supply # Input: +5Vdc Consumption :2.4W
$855.00
I-87017-G
8-channel analog input module FEATURES: I-87017 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87017 is an Analog Input Module with 8 channels. I-87017 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Input Channels: 8 Differential Input Input type: mV, V, mA Input range: +/-150mV, +/-1V, +/- 5V, +/- 10V and +/- 20 mA ( with external resistor) Sampling rate: 10 samples/sec (total) Bandwidth: 13.1 Hz Accuracy: +/- 0.1% or better Zero drift: +/- 0.03?V/?J Span drift: +/- 25 ppm/?J CMR @ 50/60 Hz: 92 dB min Over voltage protection: +/- 35 V Power Consumption: 2.5W
$463.00
I-87018-G
Thermocouple input module FEATURES: I-87018/R has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87018/R is a Thermocouple Input Module with 8 channels. I-87018/R is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Input Channels: 8 Differential Input Input Type: thermocouple, mV, V, or mA Voltage range: +/- 15mV, +/-50mV, +/- 100mV, +/- 500mV, +/-1V, +/- 2.5V Current range: +/- 20mA Sampling rate: 10 samples/sec Bandwidth: 13.1 Hz Accuracy: +/- 0.05% or better Zero drift: +/- 0.033 ppm/?J CMR @ 50/60 Hz: 150 dB NMR @ 50/60 Hz: 100 dB Span drift: 25ppm/?J Over voltage protection: +/-35V"
$463.00
I-87019R-G
8-channel Universal Analog Input Module with High Voltage Protection FEATURES: I-87019has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87019 is an Universal Analog Input Input Module with High Voltage Protection and 8 channels. I-87019 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: I-8000 Cartridge Based 8-channel Universal Analog Input Module with High Voltage Protection Input Type : mV, V, mA, Thermocouple Input Channels: 8 differential Voltage Range: ? 15mV, ? 50mV,? 100mV, ?150mV, ? 500mV,? 1V, ? 2.5V, ? 5V, ? 10V Current Range: ? 20mA (jumper selectable) Thermocouple Range : Type J, K, T, E, R, S, B, N, C, L, M, L2 Resolution : 16-bits Sampling Rate : 8 samples/second (Total) Accuracy : +/-0.15% -3dB BandWidth : 5.24Hz Common Mode Rejection : Typical 86dB Voltage Input Impedance : >2M Ohms Overvoltage Voltage Protection : +/-240Vrms Individual Channel Configurable Wire Opening Detection for Thermocouple Isolation Voltage : 3000Vdc Power : Input Voltage Range : +5Vdc Power Consumption : 1.1W
$768.00
I-87022-G
2-channel 12-bit analog output module FEATURES: I-87022 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87022 is a 12-Bit Analog Output Module with 2 channels. I-87022 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Modules Analog Output Channels:2 Resolution: 12bit Output Type:mA or V Output Ranage:0~20mA,4~20mA,0~10V Accuracy:+/-0.1% of FSR for voltage output,+-0.2% of FSR for current output Isolation Voltage:3000Vdc 7000 command compatible support dual watchdog function support power-up value for each analog output channell support safe value for each analog output channel support slew-rate control for each analog output channel Power Consumption:2.5W"
$492.00
I-87024-G
4-channel 14-bit analog output module FEATURES: I-87024 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87024 is a 14-Bit Analog Output Module with 4 channels. I-87024 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Output Channels: 4 Resolution: 14-bit Output Type: mA or V Output Range: 0 ~ 20 mA, 4 ~ 20 mA, +/- 10V Accuracy: +/- 0.1% of FSR for voltage output, +/- 0.2% of FSR for current output Isolation Voltage: 3000Vdc 7000 command compatible support dual watchdog function support power-up value for each analog output channel support safe value for each analog output channel support slew-rate control for each analog output channel Power Consumption: 2.5W
$593.00
I-87026-G
2-channel Analog Output Module FEATURES: I-87026 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87026 is an Analog Output Module with 2 channels. I-87026 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Output Channels: 2 Resolution: 16-bit Output Type: mA or V Output Range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~ 10V Accuracy: +/- 0.1% of FSR for voltage output, +/- 0.2% of FSR for current output Isolation Voltage: 3000Vdc 7000 command compatible support dual watchdog function support power-up value for each analog output channel support safe value for each analog output channel support slew-rate control for all analog output channel Power Consumption: 2.5W
$566.00
Nous tenons à ce que votre expérience de navigation sur note site soit agréable & productive. Pour toute question technique, nos représentants se feront un plaisir de vous guider pour un choix éclairé et approprié à vos besoins.
En visitant notre site, indiquez les produits qui suscitent votre intérêt en cliquant sur ajouter à mes interêts.
Besoin d'une solution ?
Nous pouvons vous apporter la réponse !