Caractéristiques détaillées:

Output type MagicWire for PLC

Introduction The FRnet network only requires a single hostcontroller to send a token that activates all FRnet I/O modules. Two host controllers cannot be used in the same FRnet network. The MA-11, MD-11, FRB-100/200, I-7188EF, I-8122 and some FR I/O modules can be used as FRnet host-controllers. When using an MA-11, MD-11 or FR I/O module as a host-controller, the switch or jumper should be set to the A1 position. Refer to the related user's manual or literature for detailed information. When using the FRB-2000, I-7188EF or I-8122, the switch doesn't have to be set.

Specifications

• Communication speed: 250K bps
• Communication distance: 400m max
• Digital input channels: 32 (MD-11, MD-11M)
• Digital output channels: 32 (MD-12, MD-12M)
• Connector type:
  37-pin D-sub female connector (MD-11, MD-12)
  37-pin D-sub male connector (MD-11M, MD-12M)
• Power requirements: 12~24V
• Wire cable: CPEV 0.9S (2P twisted-pair wire)
• Power consumption: 1.2 W
• Dimensions: 120 mm x 90 mm
• Operating temperature: -25¢XC ~ +75¢XC
• Operating humidity: 10% ~ 90% RH, non-condensing
• Storage temperature: -30¢XC ~ +85¢XC
• Storage humidity: 5% ~ 95% RH, non-condensing
• Dimensions: 76 mm x 73 mm x 15 mm