Caractéristiques détaillées:

Industrial 10/100 Base-T to 100 Base-FT Fiber Optical Converter

Introduction
The NS-200FT is a Ethernet(10/100Base-TX) to Fiber Optic(100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.

The NS-200FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125£gm fiber cables; in half duplex mode, range is 412m with 62.5/ 125£gm fiber cables.

It contains "soft start" function with overload protection, high-low voltage protection.

The width of the NS-200FT is just 32.30 mm, so it can be used where space is important.

Features

Automatic MDI / MDI-X crossover for plug-and-play

Each port supports both 10/100 Mbps speed auto negotiation

Store-and-forward architecture

Full duplex IEEE 802.3x and half duplex backpressure flow control

1.4Gbps high performance memory bandwidth.

Integrated look-up engine with dedicated 1 K unicast MAC addresses.

MTBF = 438,000 hours( Temperature is 25 ¢X)

MTBCF = 525,600 hours ( Temperature is 25 ¢X)

Supports +10~+30Vdc voltage

Supports operating temperatures from 0 ~ +70¢XC

DIN rail mount for industrial usage