Automation Industrielle | Réseau local, sans fil, GSM/GPRS | SST-2450


Caractéristiques détaillées:
Wireless Modem Module RS-232/RS-485 Interface
Introduction
SST-2450EXT is a spread spectrum radio modem with RS-232/RS-485 interface port. It is designed for data acquisition and control application between host and remote sensors. It is also useful for those applications, the cable wire is inconvenient to be installed. The SST-2450 can be used in not only peer to peer mode but also multi-point structure. Based on direct sequence spread spectrum and RF technology operating In ISM bands. The Frequency Range is 2410.496MHz~2471.936MHz. The Channel Spacing is 4.096MHz. Basically the SST-2450 is the same with SST-2400. The most different is the setting method. SST-2400 is set by jumper, and the SST-2450 is set by software utility. The new SST-2450 can also work together with this SST-2400 if you change the inside 8051 chip of SST-2400. Just contact us, then we will ship a new chip which is with a new firmware.
FeaturesHalf-duplex up to 57600bps
Auto band -rate setting
ISM band
Full-duplex or half-duplex
Spread Spectrum technology
Specifications
Frequency Range: 2.4GHz (2410.496MHz ~ 2471.936MHz)
Channel Spacing: 4.096MHz
Output Power: 0.05W
Transmit power : 17dBm?g2dBm
Modulation technique: GMSK
Radio technique: Direct sequence spread spectrum
Duplex Mode: TDD (for Full-duplex)
Number of channel: 16
Number of PN code: 16
PN code rate: 1.365 Mchips /sec.
Communication distance: Depend on external antenna, default is 300M
Maximum data transfer rate in asynchronous mode:
Full-duplex mode: 9.6Kbps
Half-duplex mode: 28.2K
Maximum data transfer rate in synchronous mode:
Full-duplex mode: 19.2Kbps
Half-duplex mode: 57.6K
Setting Method: Software setting
Antenna: Can bend
Antenna Connector : Reverse-Polarity SMA-Jack
Data Format: N,8,1 or E,8,1 dependent on software setting
Data bit error ratee Antenna: < 1/1000@ -102dBm
Input voltage: 10~30Vdc
Input current: Typical less then 250mA
Consumption:
Transmission : 2W
Receive : 1W
Size: 106mm (L) x 76mm (W) x31mm (H)
Weight: 200g
Operating temperature: -10oC~50oC
Operating humility: 0~90%
SST-2450 can work together with SST-2400(Change the 8051 chip of SST-2400).
Wireless Modem Module RS-232/RS-485 Interface
Introduction
SST-2450EXT is a spread spectrum radio modem with RS-232/RS-485 interface port. It is designed for data acquisition and control application between host and remote sensors. It is also useful for those applications, the cable wire is inconvenient to be installed. The SST-2450 can be used in not only peer to peer mode but also multi-point structure. Based on direct sequence spread spectrum and RF technology operating In ISM bands. The Frequency Range is 2410.496MHz~2471.936MHz. The Channel Spacing is 4.096MHz. Basically the SST-2450 is the same with SST-2400. The most different is the setting method. SST-2400 is set by jumper, and the SST-2450 is set by software utility. The new SST-2450 can also work together with this SST-2400 if you change the inside 8051 chip of SST-2400. Just contact us, then we will ship a new chip which is with a new firmware.
Features
Specifications
Full-duplex mode: 9.6Kbps
Half-duplex mode: 28.2K
Full-duplex mode: 19.2Kbps
Half-duplex mode: 57.6K
Transmission : 2W
Receive : 1W
Spécifications:
Frequency Range
2.4GHz (2410.496MHz ~ 2471.936MHz)
Channel Spacing
4.096MHz
Output Power
0.05W
Transmit power
17dBm¤g2dBm
Modulation technique
GMSK
Radio technique
Direct sequence spread spectrum
Duplex Mode
TDD (for Full-duplex)
Number of channel
16
Mes intérêtsss
Nous tenons à ce que votre expérience de navigation sur note site soit agréable & productive. Pour toute question technique, nos représentants se feront un plaisir de vous guider pour un choix éclairé et approprié à vos besoins.
En visitant notre site, indiquez les produits qui suscitent votre intérêt en cliquant sur ajouter à mes interêts.
Les façons de commander
Besoin d'une solution ?
Nous pouvons vous apporter la réponse !