Caractéristiques détaillées:

I-8810 Embedded I/O unit with gray color

The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc .

The CPU is a 16-bit 80188 (40MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.

Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc. The I/O modules can be easily added to the I-8410/I-8810 and can be quickly integrated into an existing system.

Features

• Supports the RS-232 or RS-485 communication interface.
• Supports the DCON communication protocol .
• Dual Bus designed to supports i-8K and i-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules.
• I/O configurable using the DCON Utility
• Firmware can be updated via the RS-232 port.
• Various SDKs provided ( free )
  DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc.
• Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules.
• The built-in watchdog circuit will reset the CPU module if a failure occurs in either the hardware or software.
• Ventilated housing designed to operate between –25°C to +75°C.
• Using DIN rail clips or Screw poles around the corners allows the control unit to be easily mounted on the control box.

Specifications

• CPU: 80188 or compatible (16-bit and 40MHz)
• SRAM: 256KBytes
• Flash ROM : 256KBytes
• EEPROM : 2KBytes
• Built-in Watchdog Timer
• COM0 : for internal communication with the 87K
  modules connected to the slots
• COM1: RS-232 (to update firmware)
• COM2 : RS-485
• COM3 : RS-232/RS-485
• I/O expansion slots:
  I-8410 : 4 slots
  I-8810 : 8 slots
• SMMI (small man machine interface)
  5-digit LED display
  4 LED indicators
  4 push buttons

Power

• Power reverse polarity protection
• Power supply: 20W
• Power requirement: 10 ~ 30 V/DC
• Power consumption:
  I-8410 : 3.9 W
  I-8810 : 5.1 W

Dimensions

• 230 x 110 x 75.5 mm ( for 4 slots )
• 354 x 110 x 75.5 mm ( for 8 slots )