Caractéristiques détaillées:

8-slots Ethernet I/O unit with gray color

Introduction The I-8430 and I-8830 are embedded Ethernet I/O control units using DCON Protocol Firmware. ICPDAS provides various I/O modules, such as analog input/output and digital input/output and counter modules which can be used in remote data acquisition and control applications for environment monitoring,?power management and factory automation, etc. via Ethernet communication.!@ he CPU is a 16-bit 80188 (40M Hz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm?or light.? Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc. The I/O modules can be easily added to the I-8430/I-8830 and can be quickly integrated into an existing system.

Features

• Supports IPv4.
• Supports the DCON communication protocol on the Ethernet port.
• Supports the?VxComm technique for all ports (RS-232 and Ethernet).
• Dual Bus designed to support i-8K and i-87K series I/O modules, such as DI/DO, AI/AO
  and?Counter/Frequency modules.
• I/O configurable via an Ethernet using the DCON Utility.?
• Firmware can be updated via the RS-232 port.
• Various SDKs provided (free)
  DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc.
• Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules.
• The built-in watchdog circuit will reset the CPU module if a failure occurs in either the hardware or
  software.?
• Ventilated housing designed to operate between !V25￠XC to +75￠XC.?
• Using DIN rail clips or Screw poles around the corners allows the control unit to be easily mounted on the control box.

Specifications

• CPU: 80188 or compatible (16-bit and 40MHz)
• SRAM : 512KBytes
• Flash ROM : 512KBytes
• EEPROM: 2KBytes
• Built-in Watchdog Timer
Ethernet port : 10BaseT NE2000 compatible
• COM1: RS-232 (to update firmware)
• COM0 : for internal communication with the 87K
  modules connected to the slots
• COM3: RS-232/485
• SMMI (small man machine interface)
  5-digits LED display
  4 LED indicators
  4 push buttons
• I/O expansion slots:
  I-8430 : 4 slots
  I-8830 : 8 slots
• Safety grounded Surge protection

Power

• Power reverse polarity protection
• Power supply: 20W
• Power requirement: 10 ~ 30 V/DC
• Power consumption:
  I-8430 : 3.9 W
  I-8830 : 5.1 W

Dimensions

• 230 x 110 x 75.5 mm (for I-8430)
• 354 x 110 x 75.5 mm (for I-8830)