Réseau & Comm. | GSM/GPRS | TCW122B-CM
Caractéristiques détaillées:
Ethernet I/O Module
TCW122B-CM is a multifunctional device for remote environmental monitoring and control, designed to work in Ethernet networks.
It can be managed by WEB interface, SNMP programs and user applications. The controller can be used as standalone device or as a part of data acquisition(SCADA) systems. TCW122B-CM has two relays with normally open and normally close contacts. The both relays can be activated locally – from status of monitored parameters or remotely – by WEB interface, SNMP managers and HTTP/XML API commands. TCW122B-CM utilizes special schematic for long 1-Wire interface support, up to two temperature or temperature+humidity sensors can be connected. Along with ambient parameters, two analog voltages and status of two digital inputs can be monitored. For every parameter can be sent e-mail and/or SNMP trap for any alarm condition.The relays of the Ethernet I/O module can be activated either remotely or locally. So-called remote activation includes friendly WEB interface or M2M protocols – MODBUS TCP/IP, SNMP, and HTTP API. The local activation is possible from scheduler, status of single parameter or by custom made functions. They can include up to four parameters.
Ethernet I/O Module
TCW122B-CM is a multifunctional device for remote environmental monitoring and control, designed to work in Ethernet networks.
It can be managed by WEB interface, SNMP programs and user applications. The controller can be used as standalone device or as a part of data acquisition(SCADA) systems. TCW122B-CM has two relays with normally open and normally close contacts. The both relays can be activated locally – from status of monitored parameters or remotely – by WEB interface, SNMP managers and HTTP/XML API commands. TCW122B-CM utilizes special schematic for long 1-Wire interface support, up to two temperature or temperature+humidity sensors can be connected. Along with ambient parameters, two analog voltages and status of two digital inputs can be monitored. For every parameter can be sent e-mail and/or SNMP trap for any alarm condition.The relays of the Ethernet I/O module can be activated either remotely or locally. So-called remote activation includes friendly WEB interface or M2M protocols – MODBUS TCP/IP, SNMP, and HTTP API. The local activation is possible from scheduler, status of single parameter or by custom made functions. They can include up to four parameters.
Spécifications:
# of Analog Inputs
2
# Output Relays
2
# of Temperature Sensor Supported
2 / or Temperature + Humidity
# of Digital Inputs
2
Mes intérêtsss
Nous tenons à ce que votre expérience de navigation sur note site soit agréable & productive. Pour toute question technique, nos représentants se feront un plaisir de vous guider pour un choix éclairé et approprié à vos besoins.
En visitant notre site, indiquez les produits qui suscitent votre intérêt en cliquant sur ajouter à mes interêts.
Les façons de commander
Besoin d'une solution ?
Nous pouvons vous apporter la réponse !