64 isolated open collector output FEATURES: 64-channel optically isolated digital output /open collector Four isolated bank. 3750V DC isolation voltage SPECIFICATIONS: Isolation Output Type : Isolated open collector : 100mA per channel(NPN) External voltage : 30V (Max.) Response time: 1Khz Typical Power requirements : +5V 800mA (typical) General Environment Operating temp 0°C - 50°C Storage temp -20°C to 70°C Humidity 0 to 90% non-condensing Dimensions: 180 mm x 105 mm

Encoder input Board for PISO-Encoder300/600

Encoder input board for Servo 300

Provides isolated connection of high level ac or dc voltage to 16 I/O Ch.

Dual Z8536 based I/O board w/40 DIO bits or 6 counters vertical 50 pin conn. Features:32 Vector, IRQ director Digital pattern recognition 40-Bits of digital I/O Six 16-bit counters Very low costFully plug and playFunctional Description:The PCI-INT32 is possibly the most powerful digital I/O accessory available for the personal computer. The heart of the PCI-INT32 is a pair or Zilog Z8536 programmable digital I/O chips.Z8536 Description:Digital I/0 - 20-bit, independently set for input/output, 2 or 3 wire hand shaking supported Counters - 3 counters set up independently or chained together internally. 32 Vector Interrupt The Z8536 can accept 16 independent external interrupts, and output an interrupt to the PC. The output from the two Z8536s may be ANDed by an on board jumper.Software Description:Includes InstaCal ® , installation, calibration and test software. The PCI-INT32 series is supported by the UniversalLibrary ® . Cables / Screw Terminal Boards:C50FF-# / CIO-MINI50

48-bit high drive 64mA digital I/O board with Right Angle 50-Pin Header Connector Features: PCI compatible 48 digital I/O bits Emulates 8255 mode 0 High output drive (64 mA sink/15 mA source)

48-bit high drive 64mA digital I/O board with SIP sockets for Pull-UP/Pull-Down Resistors; Right Angle 50-Pin Header Connector Features: PCI compatible 48 digital I/O bits Emulates 8255 mode 0 High output drive (64 mA sink/15 mA source) Includes sockets for installation of pull-up/pull-down resistors

Universal PCI Board: 24 channels of Digital I/O Board FEATURES: PCI bus Up to 56/24(PIO-D56/PIO-D24) channels of digital I/O All I/O lines buffered on the board Eight-bit groups independently selectable for I/O on 24-bit port Input / Output programmable I/O ports under software control Double side SMD, short card. Connects directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R, DB-24POR, DB-24SSR, DB-24C or any OPTO-22 Compatible daughter boards 4 interrupt sources: PC0,PC1,PC2,PC3 One DB37 connector, two 20-pin headers(only for PIO-D56) Automatically detected by windows 95/98/NT No base address or IRQ switches to set SPECIFICATIONS: All inputs are TTL compatible Logic high voltage : 2.4V (Min.) v Logic low voltage : 0.8V (Max.) All outputs are TTL compatible OPTO-22 output (CON3) Sink current : 64mA (Max.) Source current : 32mA(Max.) 16-channel output (CON1) Sink current : 8mA (Max.) Source current : 0.4mA(Max.) Environmental Operating Temperature: 0 to 60 deg/C Storage Temperature: -20 to 80 deg /C Humidity: 0 to 90% non-condensing Dimensions: 143mm X 105mm Power Consumption: +5V @ 530mA/420mA(PIO-D56/PIO-D24)"