Automation Industrielle | controleurs intégrés | I-8KE8-MTCP-G
Caractéristiques détaillées:
8-slots Ethernet I/O unit (Gray color)
Features
Specifications
Dimensions
Operating Environment
8-slots Ethernet I/O unit (Gray color)
Features
- Supports IPv4
- Supports Modbus/TCP communication protocol at Ethernet port.
- Supports Modbus/RTU communication protocol at RS-232 port.
- Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
- I/O configurable via the Ethernet (Using the Modbus Utility)
- I/O scan engine The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous to have high-data-density registers to get best communication efficiency.
- Detection of I/O module communication status (online/offline).
- The SMMI of the panel can be used to 1. Configure the network setting (IP, Mask, Gateway) 2.Set the offset value of AI/AO module
- Allowed a maximum of 8 host PCs access simultaneously
- Firmware updateable (via the RS-232 port)
- Firmware programmable We provide the Modbus SDK allowing users customized the Modbus firmware.
Specifications
- CPU:80186-80 or compatible (16-bit and 80MHz)
- SRAM:512KBytes
- Flash ROM : 512KBytes
- EEPROM : 2KBytes
- Built-in Watchdog Timer
- Ethernet port: 10BaseT NE2000 compatible
- Real time clock
- COM0: internal use (to communicate with 87K
- COM1: RS-232 (to update firmware) modules on slots)
- SMMI (small man machine interface)
5 digits number LED display
4 LED indicators
4 push buttons - I/O expansion slots:
4 slots for I-8KE4
8 slots for I-8KE8 - Frame ground (FG)
Safety grounded
Surge protection - Power consumption:
3.9 W (for I-8KE4)
5.1 W (for I-8KE8) - Power supply: 20W
- Power requirement: 10 ~ 30 VDC
Dimensions
- 230 x 110 x 75.5 mm (for I-8KE4)
- 354 x 110 x 75.5 mm (for I-8KE8)
Operating Environment
- Operating Temp.: !V25￠XC to +75￠XC.
- Storage Temp.: !V30￠XC to +85￠XC
- Humidity: 5 ~ 95%,non-condensing
Spécifications:
CPU
80186-80 or compatible (16-bit and 80MHz)
SRAM
512KBytes
Flash ROM
512KBytes
EEPROM
2KBytes
Ethernet port
10BaseT NE2000 compatible
Power supply
20W
Power requirement
10 ~ 30 VDC
Mes intérêtsss
Nous tenons à ce que votre expérience de navigation sur note site soit agréable & productive. Pour toute question technique, nos représentants se feront un plaisir de vous guider pour un choix éclairé et approprié à vos besoins.
En visitant notre site, indiquez les produits qui suscitent votre intérêt en cliquant sur ajouter à mes interêts.
Les façons de commander
Besoin d'une solution ?
Nous pouvons vous apporter la réponse !