Industrial Automation | Embedded controllers | I-8KE8-MTCP-G
Detailed features:
8-slots Ethernet I/O unit (Gray color)
Features
Specifications
Dimensions
Operating Environment
8-slots Ethernet I/O unit (Gray color)
Features
- Supports IPv4
- Supports Modbus/TCP communication protocol at Ethernet port.
- Supports Modbus/RTU communication protocol at RS-232 port.
- Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
- I/O configurable via the Ethernet (Using the Modbus Utility)
- I/O scan engine The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous to have high-data-density registers to get best communication efficiency.
- Detection of I/O module communication status (online/offline).
- The SMMI of the panel can be used to 1. Configure the network setting (IP, Mask, Gateway) 2.Set the offset value of AI/AO module
- Allowed a maximum of 8 host PCs access simultaneously
- Firmware updateable (via the RS-232 port)
- Firmware programmable We provide the Modbus SDK allowing users customized the Modbus firmware.
Specifications
- CPU:80186-80 or compatible (16-bit and 80MHz)
- SRAM:512KBytes
- Flash ROM : 512KBytes
- EEPROM : 2KBytes
- Built-in Watchdog Timer
- Ethernet port: 10BaseT NE2000 compatible
- Real time clock
- COM0: internal use (to communicate with 87K
- COM1: RS-232 (to update firmware) modules on slots)
- SMMI (small man machine interface)
5 digits number LED display
4 LED indicators
4 push buttons - I/O expansion slots:
4 slots for I-8KE4
8 slots for I-8KE8 - Frame ground (FG)
Safety grounded
Surge protection - Power consumption:
3.9 W (for I-8KE4)
5.1 W (for I-8KE8) - Power supply: 20W
- Power requirement: 10 ~ 30 VDC
Dimensions
- 230 x 110 x 75.5 mm (for I-8KE4)
- 354 x 110 x 75.5 mm (for I-8KE8)
Operating Environment
- Operating Temp.: !V25￠XC to +75￠XC.
- Storage Temp.: !V30￠XC to +85￠XC
- Humidity: 5 ~ 95%,non-condensing
Specifications:
CPU
80186-80 or compatible (16-bit and 80MHz)
SRAM
512KBytes
Flash ROM
512KBytes
EEPROM
2KBytes
Ethernet port
10BaseT NE2000 compatible
Power supply
20W
Power requirement
10 ~ 30 VDC
My Interestsss
This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.
While browsing, add the products you are interested in by clicking on the add to my interest buttons.
More ways to order
Need a Solutions?
We can provide the answer!