sdfsdf

Industrial Automation | i-87K serial modules

I-87013-G

I-87013-G

32-channel Isolated Digital Input Module FEATURES: I-87013 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87013 is a 4 Channel RTD Input Module with 8 channels. I-87013 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Input Channels: 4 Input Type: Pt, Ni Sampling rate: 10 samples/sec Bandwidth: 4 Hz Wire connection: 2/3/4 Accuracy: +/- 0.05% or better Zero drift: +/-0.3?V/ ?J CMR @ 50/60 Hz: 92 dB min. NMR @ 50/60 Hz: 100 dB Span drift: +/- 25 ppm/?J Power Consumption:3W

$609.00

I-87016-G

I-87016-G

2-channel Isolated Strain Gauge Input Module FEATURES: I-87016 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87016 is an Isolated Strain Gauge Input Module with 2 channels. I-87016 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: 2 Only one channel is available at a time Analog Input Type : mV, V, mA Sampling Rate: 10 Samples/Second Resolution: 16-bits Bandwidth: 5.24Hz Accuracy: ?0.05% FSR Zero Drift: ?0.5?V/ ?C Span Drift: 25ppm/?C CMR @ 50/60Hz: 150dB NMR @ 50/60Hz: 100dB Input Impedance: 20M Ohms Isolation: 3000V rms Digital Output Channels: 4 Open Collector to 30V Output Load: sink 30mA max Power Dissipation: 30mW Digital Input Channels: 1 Logic Level 0: +1V max Logic Level 1: +3.5 to 30V Event Counter Max Input Frequency: 50Hz # Min. Pulse Width: 1mS Power Supply # Input: +5Vdc Consumption :2.4W

$855.00

I-87017-G

I-87017-G

8-channel analog input module FEATURES: I-87017 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87017 is an Analog Input Module with 8 channels. I-87017 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Input Channels: 8 Differential Input Input type: mV, V, mA Input range: +/-150mV, +/-1V, +/- 5V, +/- 10V and +/- 20 mA ( with external resistor) Sampling rate: 10 samples/sec (total) Bandwidth: 13.1 Hz Accuracy: +/- 0.1% or better Zero drift: +/- 0.03?V/?J Span drift: +/- 25 ppm/?J CMR @ 50/60 Hz: 92 dB min Over voltage protection: +/- 35 V Power Consumption: 2.5W

$463.00

I-87018-G

I-87018-G

Thermocouple input module FEATURES: I-87018/R has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87018/R is a Thermocouple Input Module with 8 channels. I-87018/R is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Input Channels: 8 Differential Input Input Type: thermocouple, mV, V, or mA Voltage range: +/- 15mV, +/-50mV, +/- 100mV, +/- 500mV, +/-1V, +/- 2.5V Current range: +/- 20mA Sampling rate: 10 samples/sec Bandwidth: 13.1 Hz Accuracy: +/- 0.05% or better Zero drift: +/- 0.033 ppm/?J CMR @ 50/60 Hz: 150 dB NMR @ 50/60 Hz: 100 dB Span drift: 25ppm/?J Over voltage protection: +/-35V"

$463.00

I-87019R-G

I-87019R-G

8-channel Universal Analog Input Module with High Voltage Protection FEATURES: I-87019has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87019 is an Universal Analog Input Input Module with High Voltage Protection and 8 channels. I-87019 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: I-8000 Cartridge Based 8-channel Universal Analog Input Module with High Voltage Protection Input Type : mV, V, mA, Thermocouple Input Channels: 8 differential Voltage Range: ? 15mV, ? 50mV,? 100mV, ?150mV, ? 500mV,? 1V, ? 2.5V, ? 5V, ? 10V Current Range: ? 20mA (jumper selectable) Thermocouple Range : Type J, K, T, E, R, S, B, N, C, L, M, L2 Resolution : 16-bits Sampling Rate : 8 samples/second (Total) Accuracy : +/-0.15% -3dB BandWidth : 5.24Hz Common Mode Rejection : Typical 86dB Voltage Input Impedance : >2M Ohms Overvoltage Voltage Protection : +/-240Vrms Individual Channel Configurable Wire Opening Detection for Thermocouple Isolation Voltage : 3000Vdc Power : Input Voltage Range : +5Vdc Power Consumption : 1.1W

$768.00

I-87022-G

I-87022-G

2-channel 12-bit analog output module FEATURES: I-87022 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87022 is a 12-Bit Analog Output Module with 2 channels. I-87022 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Modules Analog Output Channels:2 Resolution: 12bit Output Type:mA or V Output Ranage:0~20mA,4~20mA,0~10V Accuracy:+/-0.1% of FSR for voltage output,+-0.2% of FSR for current output Isolation Voltage:3000Vdc 7000 command compatible support dual watchdog function support power-up value for each analog output channell support safe value for each analog output channel support slew-rate control for each analog output channel Power Consumption:2.5W"

$492.00

I-87024-G

I-87024-G

4-channel 14-bit analog output module FEATURES: I-87024 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87024 is a 14-Bit Analog Output Module with 4 channels. I-87024 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Output Channels: 4 Resolution: 14-bit Output Type: mA or V Output Range: 0 ~ 20 mA, 4 ~ 20 mA, +/- 10V Accuracy: +/- 0.1% of FSR for voltage output, +/- 0.2% of FSR for current output Isolation Voltage: 3000Vdc 7000 command compatible support dual watchdog function support power-up value for each analog output channel support safe value for each analog output channel support slew-rate control for each analog output channel Power Consumption: 2.5W

$593.00

I-87026-G

I-87026-G

2-channel Analog Output Module FEATURES: I-87026 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87026 is an Analog Output Module with 2 channels. I-87026 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Output Channels: 2 Resolution: 16-bit Output Type: mA or V Output Range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~ 10V Accuracy: +/- 0.1% of FSR for voltage output, +/- 0.2% of FSR for current output Isolation Voltage: 3000Vdc 7000 command compatible support dual watchdog function support power-up value for each analog output channel support safe value for each analog output channel support slew-rate control for all analog output channel Power Consumption: 2.5W

$566.00

  
1
 
2 
 
3 
 
4 
  

Refine your search

 and / or    

Send

  My Interestsss

This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.

  While browsing, add the products you are interested in by clicking on the add to my interest buttons.

 

Need a Solutions?

We can provide the answer!