Acquisition & Control on PC | Comm. Interfaces | PCI-COM422/485
PCI-COM422/485 is a single port RS-422/485 interface
Features:
- Low Cost RS-422/485 Full Duplex interface port
- PCI bus 2.1 compliant
- Control signals provided: RTS and CTS.
- Speeds to 460.8 Kbps
- 16C550 UART with 16-byte FIFO standard
- Optional 16C750 UART with 64-byte FIFO
- 9 Position D-type connector
- Optional surge suppression on each signal line
Specifications:
Serial ports: 1
Configured: Address and interrupt configured through PCI BIOS and supplied drivers
Transceivers: Full Duplex SP490-type transceiver meeting RS-422 standards to 5Mbps
Max. baud rate: to 460.8 Kbps, software selectable per channel for 115.2, 230.4, or 460.8Kbps
Serial modes: 5, 6, 7, or 8 data bits odd, even or no parity 0, 1 or 2 stop bits
UART: 16C550 standard
Termination: 120 ohm termination resistor provided
Connector: DB-9 male
Form Factor:
PCI 2.1 complaint
Software Description:
Drivers for Windows 95, 98, NT, 2000, and XP supplied
Specifications:
Serial ports
1
Configured
Address and interrupt configured through PCI BIOS and supplied drivers
Transceivers
Full Duplex SP490-type transceiver meeting RS-422 standards to 5Mbps
Max. baud rate
to 460.8 Kbps, software selectable per channel for 115.2, 230.4, or 460.8Kbps
Serial modes
5, 6, 7, or 8 data bits odd, even or no parity 0, 1 or 2 stop bits
UART
16C550 standard
Termination
120 ohm termination resistor provided
Connector
DB-9 male
This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.
While browsing, add the products you are interested in by clicking on the add to my interest buttons.
Need a Solutions?
We can provide the answer!