sdfsdf

Industrial Computers | PC/104

PCM-213

PCM-213

PC/104 interface ATA to IDE module PCMCIA (ATA) and CompactFlash (ATA) to standard IDE interface One slot for 68-pin ATA card another slot for 50-pin CompactFlash card 40-pin IDE and 4-pin power connectors Supports Type I/II/III ATA Flash, ATA HDD and CompactFlash Cards Standard PC/104 form factor +5V@70mA power requirement

$70.00

PCM-220D1

PCM-220D1

PCMCIA card drive with two PCMCIA slots Comply with PCMCIA V2.1, JEIDA 4.1 specification PCMCIA socket supports Type I/II/III Memory and I/O Cards VG-468 chips 16-bit data bus Supports two PCMCIA slots Programmable 32KB SMD-type boot EEPROM BIOS Bootable from SRAM card, Linear Flash card, ATA Flash card or ATA HDD

$270.00

PCM-225-1

PCM-225-1

PC/104 interface PCMCIA drives Complied with PCMCIA V.2.10 and JEIDA 4.2 Specification One slot for PC-104 plus 16-bit legacy mode supported PCI way legacy DMA supported Supports 5V/ 3.3V, 16/ 32-bit Cards T/I 1420 PCMCIA controller Hot-Swap supported

$203.00

PCM-225-2

PCM-225-2

PC/104 interface PCMCIA drives Complied with PCMCIA V.2.10 and JEIDA 4.2 Specification One slot for PC-104 plus 16-bit legacy mode supported PCI way legacy DMA supported Supports 5V/ 3.3V, 16/ 32-bit Cards T/I 1420 PCMCIA controller Hot-Swap supported

$216.00

A104-KIT01A

A104-KIT01A

ISA AND PC/104 diagnostic card Bus : ISA and PC/104 7-Segments LED display for port 80H BIOS error code Troubleshooting for POST (Power On Self Test) when system boot-up 8-pin external power connector for PC/104 system testing

$40.00

DOC-KIT104

DOC-KIT104

PC/104 DiskOnChip Carry Board Bus:PC/104 Four DiskOnChip sockets ON board Sofware utility to combine multi-DOC chip as one driver under DOS environment

$31.00

ICOP-0070

ICOP-0070

PC/104 Power Supply AC/DC Module Power: Input voltage range: 90 - 264 VAC Output voltage: +5VDC @ 2A, -5VDC @0.2 A, +12VDC @1 A, -12 VDC @ 0.3 A Input frequency: 47 - 63 Hz Inrush current cold: 20 A @ 110 VAC, 40A @ 220 VAC Hold-up time: 16 ms Raise time: 500 ms Overload protection: power limit Short protection: auto- Recovery MOSFET design Built-in line filter Meets FCC, CE, TUV Meets UL478 and CS Fast type FUSE 2A/250V Bus Interface PC/104 Standard Compliant Connector 3-pin AC input 6-pin DC output Dimensions 90(L)x96(W)mm (3.54" x 3.78") Weight 120g Operating Temperature 0°C ~+60°C

Call Us

ICOP-0072

ICOP-0072

PC/104 Power Supply DC/DC with DIO Module Digital I/O24 bit digital I/O lines (1 group)Group emulates a 8225 PPI mode 0Buffered circuits for higher driving capacity than 8255Output status read backPin-compatible with OPTO-22 I/O module racksTransfer rate: 300 KB/sec. (Typical)Digital output: Logic level 0:0.5 Vmax. @ 24mA sinkLogic level 1:2.0 Vmin @15 mA sourceDigital input: Logic level 0: 0.8 V max.Logic level 1: 2.0 V min.PowerInput range: 8 - 48VDCOutput: 5VDC @ 3A MaxSwitch frequency: 52 KHzEfficiency: 80%Overload Protection: Shutdown when reaching thermal or current limitConnector 50-pin box header for I/O portDimensions 90 (L) x 96 (W) mm (3.54" x 3.78")Weight 110gOperating Temperature -20¢XC~+60¢XC

Call Us

  
1
 
2 
 
3 
 
4 
  

Refine your search

 and / or    

Send

  My Interestsss

This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.

  While browsing, add the products you are interested in by clicking on the add to my interest buttons.

 

Need a Solutions?

We can provide the answer!