10.4" Color STN Panel Display With Touch Input power : 21 ~ 30VDC Power consumption : 15W Noise immunity : complies with IEC 1000-4-4, level 2 (2KV, 100kHz) FCC : Complies with FCC Class A CE : complies with EN50081-2 and EN50082-2 Industrial standards Voltage resistance : 500VAC (1 min.) Isolated resistance : Exceed 50MW at 500VDC Vibration endurance : 10 to 25 Hz(X,Y,Z direction 2G 30minutes) Protection structure : IP65 front panel(0 ring seal) Operating Temperature : 0-45C° Operation humidity : 10-90% RH Outside Dimensions : 315 x 238 x 62mm(WxHxD) Panel cut dimensions : 302x225mm(WxH) Enclosure : plastic ABS+PC Weight : Approx. 2.5KG Hardware Specification Display : 10.4"" high brightness TFT or DSTN color Surface Brightness : TFT(250cd/m2) DSTN(150cd/m2) Contrast Ratio : TFT(100:1) DSTN(30:1) Resolution : 640(W) x 480(H) dots Color : 256 colors Back light : CCFT x 2 (auto shutdown) CCFL : Life time : 10,000hr.min. Touch panel : 8 wires resistive type Touch accuracy : 2mm Surface hardness : 4H Serial port : one RS-232 port and one RS-232/485 port Processor : 32bit RISC CPU running at 166MHz (16kB I cache & 8kB D cache) Memory : 4MB DRAM, 1MB flash memory (2MB option available) Parallel port : Standard parallel printer port System diagnostic : Power failure detection Functional Specification Screen edit : by Easy Builder screen editor (running under Windows) Support PLC : OMRON, MITSUBISHI FX, Axx,A-B SLC, SIEMENS S7, LG MASTER K, KOYO Direct, MATSUSHITA FP, FACON FB,HITACHI H, SHARP JW,Fuji NB...and more Support Printer : EPSON ESC/P2 compatible"

10.4"" Color TFT Panel Display With Touch Input power : 21 ~ 30VDC Power consumption : 15W Noise immunity : complies with IEC 1000-4-4, level 2 (2KV, 100kHz) FCC : Complies with FCC Class A CE : complies with EN50081-2 and EN50082-2 Industrial standards Voltage resistance : 500VAC (1 min.) Isolated resistance : Exceed 50MW at 500VDC Vibration endurance : 10 to 25 Hz(X,Y,Z direction 2G 30minutes) Protection structure : IP65 front panel(0 ring seal) Operating Temperature : 0-45C° Operation humidity : 10-90% RH Outside Dimensions : 315 x 238 x 62mm(WxHxD) Panel cut dimensions : 302x225mm(WxH) Enclosure : plastic ABS+PC Weight : Approx. 2.5KG Hardware Specification Display : 10.4"" high brightness TFT or DSTN color Surface Brightness : TFT(250cd/m2) DSTN(150cd/m2) Contrast Ratio : TFT(100:1) DSTN(30:1) Resolution : 640(W) x 480(H) dots Color : 256 colors Back light : CCFT x 2 (auto shutdown) CCFL : Life time : 10,000hr.min. Touch panel : 8 wires resistive type Touch accuracy : 2mm Surface hardness : 4H Serial port : one RS-232 port and one RS-232/485 port Processor : 32bit RISC CPU running at 166MHz (16kB I cache & 8kB D cache) Memory : 4MB DRAM, 1MB flash memory (2MB option available) Parallel port : Standard parallel printer port System diagnostic : Power failure detection Functional Specification Screen edit : by Easy Builder screen editor (running under Windows) Support PLC : OMRON, MITSUBISHI FX, Axx,A-B SLC, SIEMENS S7, LG MASTER K, KOYO Direct, MATSUSHITA FP, FACON FB,HITACHI H, SHARP JW,Fuji NB...and more Support Printer : EPSON ESC/P2 compatible"

MMICON + 4 x 4 keyboard + 240 x 64 Graphic LCD FEATURES: The MMICON is a compact size man-machine interface control board with a 4 x 4 keyboard interface, a 240 x 64-bit graphics LCD interface, a RS-232 or RS-485 Interface, 10 isolated digital input. This control board is designed to work with a PC or PLC and implement a cost-efective man-machine interface. PC based users can integrate an operator interface, insted of the regular monitor and keyboard. The MMICON has RS-232 or RS-485 ( Jumper Selectable) ports to communicate with PC. The PC can send out commands to change the display page or send out strings to display on the specified location. The user should need an I-7520 (RS-232 to RS-485 converter) to implement an RS-485 network. The PC can control up to 256 MMICON controllers in one 2-wire, RS-485 network. PLC users can use digital I/O ports to communicate with the MMICON. The PLC sends the page number through digital I/O and the MMICON will automatically display the related image stored in EEPROM. When using the OMRON PLC, one can use RS-232 to communicate with the MMI-CON port. The PLC sends the page number into the PLC internal data memory (DM). The MMICON polls the data memory constantly and displays the value of the internal data memory. The DM value can be mixed with image stored in EEPROM. The input value of the 4 x 4 keyboard can be written into the data memory. It is also suitable as a man-machine interface for PLC. The user edits the text and paints the images using the utility in PC environment. The hex file can be programmed into the EEPROM by a regular programmer. Directly connects to PC via the RS-232C port Directly connects to OMRON PLC via the RS-232C port Directly connects to common PLC via the isolated digital input port Supports maximum 256 MMICON controller if RS-485 network used 240 x 64 dots LCD interface 4 x 4 Keyboard interface Image stored in on board EEPROM/EPROM/ ROM SPECIFICATIONS: EEPOM size : 128K / 256K / 512K Control Board Dimensions: 162mm x 70mm Digital Logic Level: Input Low voltage : 0 (min.) ~+1Vdc(Max.) Input High Voltage : +12Vdc (min) ~ +24VVdc(max.) Digital Input Impedance : 3K(Ohm) Power Requirement: +10~30Vdc, 1Amp LCD Display LCD display dots: 240 x 64 dots LCD display area: 108mm x 77mm 4 x 4 Keyboard (Starter Kit Only) Digital Input Testing Switch

MMICON + 240 x 64 Graphic LCD FEATURES: The MMICON is a compact size man-machine interface control board with a 4 x 4 keyboard interface, a 240 x 64-bit graphics LCD interface, a RS-232 or RS-485 Interface, 10 isolated digital input. This control board is designed to work with a PC or PLC and implement a cost-efective man-machine interface. PC based users can integrate an operator interface, insted of the regular monitor and keyboard. The MMICON has RS-232 or RS-485 ( Jumper Selectable) ports to communicate with PC. The PC can send out commands to change the display page or send out strings to display on the specified location. The user should need an I-7520 (RS-232 to RS-485 converter) to implement an RS-485 network. The PC can control up to 256 MMICON controllers in one 2-wire, RS-485 network. PLC users can use digital I/O ports to communicate with the MMICON. The PLC sends the page number through digital I/O and the MMICON will automatically display the related image stored in EEPROM. When using the OMRON PLC, one can use RS-232 to communicate with the MMI-CON port. The PLC sends the page number into the PLC internal data memory (DM). The MMICON polls the data memory constantly and displays the value of the internal data memory. The DM value can be mixed with image stored in EEPROM. The input value of the 4 x 4 keyboard can be written into the data memory. It is also suitable as a man-machine interface for PLC. The user edits the text and paints the images using the utility in PC environment. The hex file can be programmed into the EEPROM by a regular programmer. Directly connects to PC via the RS-232C port Directly connects to OMRON PLC via the RS-232C port Directly connects to common PLC via the isolated digital input port Supports maximum 256 MMICON controller if RS-485 network used 240 x 64 dots LCD interface 4 x 4 Keyboard interface Image stored in on board EEPROM/EPROM/ ROM SPECIFICATIONS: EEPOM size : 128K / 256K / 512K Control Board Dimensions: 162mm x 70mm Digital Logic Level: Input Low voltage : 0 (min.) ~+1Vdc(Max.) Input High Voltage : +12Vdc (min) ~ +24VVdc(max.) Digital Input Impedance : 3K(Ohm) Power Requirement: +10~30Vdc, 1Amp LCD Display LCD display dots: 240 x 64 dots LCD display area: 108mm x 77mm 4 x 4 Keyboard (Starter Kit Only) Digital Input Testing Switch

LCD Displays MODEL : DM-121GS Model LCD Size AC Input 9~36VDC Input Resitive Type Touch Screen DM-121GS 12.1" V DM-121GMS V DM-121GS/T-R V V DM-121GMS/T-R V V DM-150GS 15" V DM-150GMS V DM-150GS/T-R V V DM-150GMS/T-R V V DM-170GS 17" V DM-170GMS V DM-170GS/T-R V V DM-170GMS/T-R V V Optional Mounting Kits Model No: Descriptions: PK-121M, PK-150M, PK-170M 12", 15", 17" Monitor panel mounting kits WK-121MS, WK-150MS, WK-170MS 12", 15", 17" Monitor wall mount kit, silver color RK-121-RS, RK-150-RS, RK-170-RS 12", 15", 17" Monitor rack mount kit ARM-11, ARM-31 Monitor arm (loading capacity up to 6kg/14kg) STAND-100-RS Monitor stand supports up to 8kg Specifications   DM-121GS DM-150GS DM-170GS LCD Size 12.1" 15" 17" Interface VGA/DVD-D VGA/DVD-D VGA/DVD-D Resolution 800 x 600 1024 x 768 1280 x 1024 Brightness (cd/m2) 400 350 300 Contrast 500:1 400:1 500:1 LCD Color 262K 262K 16.2M Pixel Pitch (mm) 0.3075 0.297 0.264 Front Frame Aluminum Aluminum Aluminum View Angle (H/V) 140/110 120/100 140/130 Power Adapter 45W 45W 45W OSD Function Yes Yes Yes Chassis/ Coloer Steel/Sliver Steel/Sliver Steel/Sliver IP Level IP65 IP65 IP65 Operating Temperature 0°C-50°C 0°C-50°C 0°C-50°C Dimension (W x H x D) mm 340x260x58 410x309x65.1 452x365x65.2 Weight (Net/Gross) 3.8kg/6kg 6kg/8.9kg 8.6kg/12.2kg Optional Touch Screen Yes/RS-232 Yes/RS-232 Yes/RS-232

HMI Controller 5.7" RISC-based Human Machine Interface RISC-based and low-power consumption Samsung ARM 2410 / 203MHz processor 5.7" High brightness (500cd/m2) TFT LCD with resolution of 320x240 32MB system memory and 32MB onboard Flash memory Sealed resistive touch screen Support panel mount, optional VESA 75 DC 24V power input

HMI Controller 8" RISC-based Human Machine Interface Fanless ARM 9 based Intel Xscale PXA255 processor 8" High brightness (350cd/m2) TFT LCD with resolution of 800x600 Onboard with DRAM, Flash and SRAM memory bank SMI SM501 companion Chip supporting dual display Supports one CompactFlash card slot NEMA 4/IP65 compliant front panel One Ethernet Port 10/100 base-T supported USB 1.1 host and 1.1 client supported

HMI Controller 8" Industrial Fanless Touch Panel Computer 8" TFT LCD (350 cd/m2 ) with resolution of 800 x 600 Fanless and AMD LX-800 500MHz processor One 200-pin SO-DIMM DDR 266/333MHz up to 1GB NEMA 4/IP 65 compliant front panel Sealed resistive touch screen Support Panel / VESA 75 mount DC 11~28V wide-range power input