sdfsdf

Acquisition & Control on PC | USB To Sensor System

#Inet-555

#Inet-555

INSTRUNET i555 STARTER SYSTEMUsb 2.0 High Speed Data Acquisition Hardware for Windows ? Xp Sp2, Vista or 7 (Xp/Vs/7/8)InstruNet Software2x Precision Voltage Outputs (±10V, 14bit D/A)2x Voltage Outputs (0.. 10V, 8bit D/A)4x Universal Digital I/O (20mA sink, -10V..30V)Connect Directly To Sensors: Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, ResistanceEasily expand via 2 free slots in 4 slot i4xx Card CageThe i555 includes the following products: i240, i430, i510, i400, i410, i312.

$1946.00

i240

i240

MODEL i240 USB 2.0 INSTRUNET CONTROLLER The i240 USB instruNet Controller is used to connect a Windows ≥ Xp Sp2 computer to an instruNet network via the USB 2.0 High Speed bus (480M bits/sec). An instruNet network consists of i4xx Card Cages and i100 boxes which are daisy-chained together. The i240 requires an external power supply (e.g. iNet-312.8, sold separately) and a computer with one free Usb 2.0 High Speed (480M) port. Typical Application In a typical application, the i240 controller interfaces an i4xx Card Cage to a Windows computer, as illustrated.

$507.00

i430

i430

i430 16se/8di UNIVERSAL INPUT A/D PLUG-IN CARD The i430 card plugs into a 4 to 16 slot instruNet i4xx Card Cage, which in turn attaches to a Windows computer.16se/8di Voltage Input Channels with 16-bit A/D Converter2x Precision Analog Voltage Outputs (±10V, 14bit D/A)2x Analog Voltage Outputs (0..+10V, 8bit D/A)4x Universal Digital I/O (20mA sink, -10V..30V)Connect Directly To Sensors: Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, ResistanceExcitation power (+3.3V ±.2V,

$797.00

i510

i510

i510 WIRING BOX The i510 Wiring Box bolts to any i4xx Card that has an Hd44 Connector, and provides the following features:Screw Terminals and pcb solder pads to which one can attach external signals to Hd44 connectorEnclosure box for end user installed wires and shunt resistorsInternal i51x cjc sensor enables the measurement of thermocouple temperature sensorsThe i51x is of clamshell design with identical top and bottom plastic halves that mate via 3 bolts. Two captive 4-40 bolts secure the i51x to any i4xx card that has an Hd44 male connector. The i510 is 7 x 2.5 x 13 cm in size (2.7" x 1" x 5.3", d/w/h).

$122.00

i400

i400

MODEL i400 CARD CAGE The i400 Card Cage provides the following features:Each i400 supports up to four i4xx cardsMultiple i400's can be bolted together by the end user, side-by-side, to create an 8, 12, or 16 slot systemSolid aluminum construction The i400 is 15 x 11 x 14 cm in size (6 " x 4.5" x 5.6", d/w/h) Place on desktop; or affix to DIN rail, 19" rack, or wall Includes Hardware Kit that enables one to bolt multiple i400's side-by-side; and to bolt i400 to wall.

$662.00

i312

i312

MODEL i312 POWER SUPPLY & POWER ADAPTOR CABLEThe Model i312 Power Supply provides +5, -12 and +12 Volt regulated DC power to a 5pin DIN 41524 Connnector. The i312 is available with either a USA (#iNet-312.8) or European (#iNet-312.8eu) power plug.Power Supply, 110/220VAC, 5V/3.5A, +12V/1.5A, -12V/0.8A, USA Nema Plug. Includes one i300 power adaptor cable to cable power to instruNet network.Output ripple and noise is < 1.0% peak-to-peak of the DC voltage (e.g. < 50mVpp on 5 VDC output).Over Voltage and Over Current protected.Operates at ambient temperatures between 0° to 70°C.

$230.00

i330

i330

MODEL i330 INSTRUNET OPTICAL ISOLATOR The Model 330 Electrical Isolator provides 1000 Volts of optical isolation at one point within an instruNet network. This is often used to eliminate ground loops between the computer and items under test, and to reduce noise that is transmitted from the computer to sensors. When measuring small voltages (e.g.

$526.00

i410

i410

MODEL i410 INSTRUNET INTERFACE CARD The i410 card connects an i4xx Card Cage to a Windows computer via an instruNet i240 USB, i200 PCI or i230 PCMCIA controller card. The i410 plugs into the left-most slot (slot #1) of an i4xx Card cage. One and only one i410 is required per i4xx card cage when working with i2x0 controllers. The i410 provides the following features:Two Db25 connectors allow daisy-chaining multiple i4xx Card Cage and i100 devices to one i2x0 controller card. Front panel red power light shows presence of 5V, 12V, and -12V power. Front panel green I/O light blinks when computer communicates with card cage. Includes one Db25 Male to Female 3 meter (10ft) Cable.

$392.00

  
1
 
2 
 
3 
  

Refine your search

 and / or    

Send

  My Interestsss

This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.

  While browsing, add the products you are interested in by clicking on the add to my interest buttons.

 

Need a Solutions?

We can provide the answer!