Acquisition & Control on PC | Uinversal Sensor Input
#Inet-555
INSTRUNET i555 STARTER SYSTEMUsb 2.0 High Speed Data Acquisition Hardware for Windows ? Xp Sp2, Vista or 7 (Xp/Vs/7/8)InstruNet Software2x Precision Voltage Outputs (±10V, 14bit D/A)2x Voltage Outputs (0.. 10V, 8bit D/A)4x Universal Digital I/O (20mA sink, -10V..30V)Connect Directly To Sensors: Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, ResistanceEasily expand via 2 free slots in 4 slot i4xx Card CageThe i555 includes the following products: i240, i430, i510, i400, i410, i312.
$1946.00
i430
i430 16se/8di UNIVERSAL INPUT A/D PLUG-IN CARD The i430 card plugs into a 4 to 16 slot instruNet i4xx Card Cage, which in turn attaches to a Windows computer.16se/8di Voltage Input Channels with 16-bit A/D Converter2x Precision Analog Voltage Outputs (±10V, 14bit D/A)2x Analog Voltage Outputs (0..+10V, 8bit D/A)4x Universal Digital I/O (20mA sink, -10V..30V)Connect Directly To Sensors: Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, ResistanceExcitation power (+3.3V ±.2V,
$797.00
i510
i510 WIRING BOX The i510 Wiring Box bolts to any i4xx Card that has an Hd44 Connector, and provides the following features:Screw Terminals and pcb solder pads to which one can attach external signals to Hd44 connectorEnclosure box for end user installed wires and shunt resistorsInternal i51x cjc sensor enables the measurement of thermocouple temperature sensorsThe i51x is of clamshell design with identical top and bottom plastic halves that mate via 3 bolts. Two captive 4-40 bolts secure the i51x to any i4xx card that has an Hd44 male connector. The i510 is 7 x 2.5 x 13 cm in size (2.7" x 1" x 5.3", d/w/h).
$122.00
i400
MODEL i400 CARD CAGE The i400 Card Cage provides the following features:Each i400 supports up to four i4xx cardsMultiple i400's can be bolted together by the end user, side-by-side, to create an 8, 12, or 16 slot systemSolid aluminum construction The i400 is 15 x 11 x 14 cm in size (6 " x 4.5" x 5.6", d/w/h) Place on desktop; or affix to DIN rail, 19" rack, or wall Includes Hardware Kit that enables one to bolt multiple i400's side-by-side; and to bolt i400 to wall.
$662.00
i312
MODEL i312 POWER SUPPLY & POWER ADAPTOR CABLEThe Model i312 Power Supply provides +5, -12 and +12 Volt regulated DC power to a 5pin DIN 41524 Connnector. The i312 is available with either a USA (#iNet-312.8) or European (#iNet-312.8eu) power plug.Power Supply, 110/220VAC, 5V/3.5A, +12V/1.5A, -12V/0.8A, USA Nema Plug. Includes one i300 power adaptor cable to cable power to instruNet network.Output ripple and noise is < 1.0% peak-to-peak of the DC voltage (e.g. < 50mVpp on 5 VDC output).Over Voltage and Over Current protected.Operates at ambient temperatures between 0° to 70°C.
$230.00
i330
MODEL i330 INSTRUNET OPTICAL ISOLATOR The Model 330 Electrical Isolator provides 1000 Volts of optical isolation at one point within an instruNet network. This is often used to eliminate ground loops between the computer and items under test, and to reduce noise that is transmitted from the computer to sensors. When measuring small voltages (e.g.
$526.00
i410
MODEL i410 INSTRUNET INTERFACE CARD The i410 card connects an i4xx Card Cage to a Windows computer via an instruNet i240 USB, i200 PCI or i230 PCMCIA controller card. The i410 plugs into the left-most slot (slot #1) of an i4xx Card cage. One and only one i410 is required per i4xx card cage when working with i2x0 controllers. The i410 provides the following features:Two Db25 connectors allow daisy-chaining multiple i4xx Card Cage and i100 devices to one i2x0 controller card. Front panel red power light shows presence of 5V, 12V, and -12V power. Front panel green I/O light blinks when computer communicates with card cage. Includes one Db25 Male to Female 3 meter (10ft) Cable.
$392.00
i420
i420 Product Overview The i420 card plugs into a 4 to 16 slot instruNet i4xx Card Cage, which in turn attaches to a Windows computerThis Amplifier (not A/D) module provides 20se/10di voltage input channels (Ch#1...#20)40 , each of which are independently software programmable with Windows software that support the direct connection to many common sensor types This module does not contain an A/D converter, and therefore internally routes measured voltage to an i43x A/D module anywhere in card cage. At least one i43x must be installed in order to measure a voltage with this module. Each of the 10 differential channels support the direct connection to the following sensor types (click for Wiring Diagram and Setup Instructions): Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, Resistance Voltage input range on each channel is independently software programmable to one of: ±20mV, ±40mV, ±80mV, ±2.5V, ±5V, ±10V, 0 to 5V, 0 to 10V Each channel provides the following software programmable parameters: A/D Signal-Averaging-Per-Point (0 ... 100mSec)3 , Sample-Rate (samples-per-second-per-channel)17 , Digital IIR Filter (LowPass, HighPass, BandPass, or BandStop)55 , Voltage Measurement Range (±20mV...±10V)1 , Sensor Type13 , and Single-Ended or Differential Wiring Each channel provides optional digital IIR lowpass, highpass, bandpass and bandstop filters with independent software programmable cut-off frequency, minimum dB stopband attenuation, maximum dB passband attenuation, and filter type (e.g. Elliptic, Chebyshev B, Chebyshev S, and Butterworth). Number of poles/zeros (i.e. "filter order") is programmable between 2 and 32e55 . Excitation power (+3.3V ±.2V, 2V) or low (e.g.
$567.00
This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.
While browsing, add the products you are interested in by clicking on the add to my interest buttons.
Need a Solutions?
We can provide the answer!