sdfsdf

Acquisition & Control on PC | PCIe DIO

PCIe-DIO24

PCIe-DIO24

PCIe-DIO24: PCI Express (PCIe) bus compatible, 24-channel digital I/O board The PCIe-DIO24 is a 24-channel digital I/O board with selectable 3.3V or 5V logic levels for PCI Express bus compatible computers. The 24 bits function as an 8-bit Port A, an 8-bit Port B, and an 8-bit Port C, which may be further divided into two 4-bit ports (Port C-HI and Port C-LO). There is a 10 kilohm pull-up/pull-down resistor network associated with each digital port. Their direction is software selectable and stored on the board, so the user can use the board in a different PC without running configuration software: simply set the board number in InstaCal. The PCIe-DIO24 is connector and software compatible with Measurement Computing's highly popular PCI-based PCI-DIO24 and ISA-based CIO-DIO24 boards, making migration from the ISA or PCI bus about as simple as unplugging the digital I/O cable’s 37-pin connector from the old board and plugging it into the new one. The PCIe-DIO24 is also supported by the same wide variety of external relay and solid state I/O module racks. The PCIe-DIO24 is completely plug-and-play. There are no switches, or jumpers on the board. All board addresses, interrupt channels, etc. are set by your computer's plug-and-play software. 24 channels of digital I/O with selectable 3.3V and 5V logic levels: 8-bit Port A, 8-bit Port B, 8-bit Port C (may be made up of 4-bit C-HI, and 4-bit C-LO) Fully plug-and-play Emulates 82C55 mode zero Software selectable pull-up and pull-down resistor configurations Digital I/O lines are accessed through a 37-pin D-type connector Software and connector compatibility with PCI-DIO24 and CIO-DIO24 for seamless migration of existing applications

$528.00

PCIe-DIO96H

PCIe-DIO96H

PCIe-DIO96H: PCI Express (PCIe) bus compatible, 96-channel, high output current digital I/O board Measurement Computing's PCIe-DIO96H is a high-density, 5-volt logic level, digital I/O board for PCI Express compatible computers. It offers 96 channels of digital I/O. It provides the I/O in four 24-bit groups based on an 82C55, mode 0 emulation. Each group provides an 8-bit port A, an 8-bit port B, and an 8-bit port C that can be split into a 4-bit port C-HI and a 4-bit port C-LO. The PCIe-DIO96H outputs are high-drive TTL that can source 15 mA and sink 64 mA. There is a 10 kilohm pull-up/pull-down resistor network associated with each digital port. Their direction is software selectable and stored on the board, so the user can use the board in a different PC without running configuration software: simply set the board number in InstaCal. 96-bidirectional I/O channels (5 V compatible), in four independent port groups Each digital port group is divided into two 8-bit ports and two 4-bit ports Fully plug-and-play Emulates 82C55 mode zero Software selectable pull-up and pull-down resistor configurations Digital I/O lines are accessed through a 100-pin connector Software and connector compatibility with PCI-DIO96H for seamless migration of existing applications

$849.00

1

Refine your search

 and / or    

Send

  My Interestsss

This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.

  While browsing, add the products you are interested in by clicking on the add to my interest buttons.

 

Need a Solutions?

We can provide the answer!