Acquisition & Control on PC | USB To Sensor System | i423


Detailed features:
i423 Product Overview
The i423 card plugs into a 4 to 16 slot instruNet i4xx Card Cage, which in turn attaches to a Windows computer
6di Voltage Input Channels
4x Universal Digital I/O (20mA sink, -10V..30V)
Connect Directly To Sensors: Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, Resistance, Accelerometer
Additional i43x A/D module required to measure voltages
Amplifier/Filter outputs made available at Hd44 connector for end user monitoring
Product Summary
This Amplifier (not A/D) module provides 6 differential voltage input channels (Ch#1/2...#11/12)40 , each of which are independently software programmable with Windows software that support the direct connection to many common sensor types
This module does not contain an A/D converter, and therefore internally routes measured voltage to an i43x A/D module anywhere in card cage. At least one i43x must be installed in order to measure a voltage with this module.
Each of the 6 differential channels support the direct connection to the following sensor types (click for Wiring Diagram and Setup Instructions): Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, Resistance, Accelerometer
Each channel provides several independent analog low pass filter options: 0.006KHz / 2poles, 4KHz / 2poles, or FullBandwidth
Voltage input range on each channel is independently software programmable to one of: ±5mV, ±10mV, ±20mV, ±40mV, ±80mV, ±300mV, ±600mV, ±1.2V, ±2.5V, ±5V, 0 to 40mV, 0 to 80mV, 0 to 2.5V, 0 to 5V
Each channel provides the following software programmable parameters: A/D Signal-Averaging-Per-Point (0 ... 100mSec) , Sample-Rate (samples-per-second-per-channel) , Analog Low Pass Filter (0.006KHz / 2poles, 4KHz / 2poles, or FullBandwidth)2, Digital IIR Filter (LowPass, HighPass, BandPass, or BandStop) , Voltage Measurement Range (±5mV...±5V) , and Sensor Type
Each input channel passes through it's own amplifier with a software selectable voltage gain of 1 or 64, and optional analog low pass filter. After this treatment, these are made available at Hd44 connector pins #17..#22 for purposes of end user monitoring, in addition to possible internal digitizing by A/D.
Each channel provides optional digital IIR lowpass, highpass, bandpass and bandstop filters with independent software programmable cut-off frequency, minimum dB stopband attenuation, maximum dB passband attenuation, and filter type (e.g. Elliptic, Chebyshev B, Chebyshev S, and Butterworth). Number of poles/zeros (i.e. "filter order") is programmable between 2 and 32 .
Excitation power (+3.3V ±.2V, <0.22A, 37mA per sensor max) is provided for sensors, along with other End User Power voltages. This 3.3V, which is referenced to instruNet Ground, is automatically readback by A/D when calculating sensor values.
The 20mA sink digital I/O port consists of 4 individual TTL-compatible lines (Ch#25...#28), each of which can be configured as: digital input bit, digital output bit, control output, clock output43 . When configured as an input, a channel can be used to sense a digital high (2.1 to 30 Volts) or digital low (-10V to .65Volts). When configured as an output, a channel can be set high (e.g. >2V) or low (e.g. <0.8V). These I/O pins are short-circuit protected against high voltages up to 32.0V and down to -16.0V.
i423 Product Overview
The i423 card plugs into a 4 to 16 slot instruNet i4xx Card Cage, which in turn attaches to a Windows computer
6di Voltage Input Channels
4x Universal Digital I/O (20mA sink, -10V..30V)
Connect Directly To Sensors: Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, Resistance, Accelerometer
Additional i43x A/D module required to measure voltages
Amplifier/Filter outputs made available at Hd44 connector for end user monitoring
Product Summary
This Amplifier (not A/D) module provides 6 differential voltage input channels (Ch#1/2...#11/12)40 , each of which are independently software programmable with Windows software that support the direct connection to many common sensor types
This module does not contain an A/D converter, and therefore internally routes measured voltage to an i43x A/D module anywhere in card cage. At least one i43x must be installed in order to measure a voltage with this module.
Each of the 6 differential channels support the direct connection to the following sensor types (click for Wiring Diagram and Setup Instructions): Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, Resistance, Accelerometer
Each channel provides several independent analog low pass filter options: 0.006KHz / 2poles, 4KHz / 2poles, or FullBandwidth
Voltage input range on each channel is independently software programmable to one of: ±5mV, ±10mV, ±20mV, ±40mV, ±80mV, ±300mV, ±600mV, ±1.2V, ±2.5V, ±5V, 0 to 40mV, 0 to 80mV, 0 to 2.5V, 0 to 5V
Each channel provides the following software programmable parameters: A/D Signal-Averaging-Per-Point (0 ... 100mSec) , Sample-Rate (samples-per-second-per-channel) , Analog Low Pass Filter (0.006KHz / 2poles, 4KHz / 2poles, or FullBandwidth)2, Digital IIR Filter (LowPass, HighPass, BandPass, or BandStop) , Voltage Measurement Range (±5mV...±5V) , and Sensor Type
Each input channel passes through it's own amplifier with a software selectable voltage gain of 1 or 64, and optional analog low pass filter. After this treatment, these are made available at Hd44 connector pins #17..#22 for purposes of end user monitoring, in addition to possible internal digitizing by A/D.
Each channel provides optional digital IIR lowpass, highpass, bandpass and bandstop filters with independent software programmable cut-off frequency, minimum dB stopband attenuation, maximum dB passband attenuation, and filter type (e.g. Elliptic, Chebyshev B, Chebyshev S, and Butterworth). Number of poles/zeros (i.e. "filter order") is programmable between 2 and 32 .
Excitation power (+3.3V ±.2V, <0.22A, 37mA per sensor max) is provided for sensors, along with other End User Power voltages. This 3.3V, which is referenced to instruNet Ground, is automatically readback by A/D when calculating sensor values.
The 20mA sink digital I/O port consists of 4 individual TTL-compatible lines (Ch#25...#28), each of which can be configured as: digital input bit, digital output bit, control output, clock output43 . When configured as an input, a channel can be used to sense a digital high (2.1 to 30 Volts) or digital low (-10V to .65Volts). When configured as an output, a channel can be set high (e.g. >2V) or low (e.g. <0.8V). These I/O pins are short-circuit protected against high voltages up to 32.0V and down to -16.0V.
Specifications:
# of Analog Inputs
6 differential
Input ranges
+/-5mv to 0-5 volt
Input type
Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain Gage, Potentiometer, Current, Resistance, Accelerometer
Range selection
Independantly Software Programmable
Software selectable Gain
1 to 64
Signal Averaging
0 to 100ms
programmable filters Filter
(LowPass, HighPass, BandPass, or BandStop
My Interestsss
This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.
While browsing, add the products you are interested in by clicking on the add to my interest buttons.
More ways to order
Need a Solutions?
We can provide the answer!