Detailed features:

16-channel isolated digital output module with 20-pin screw terminal connector

Introduction The FR-2053/2053T/2053S has 16-channel isolated photocoupler input, while the FR-2057/2057T/2057S has 16-channel isolated photo-coupler output. The default signal connector of FR-2053 and FR-2057 is a 20-pin header. The "T" stands for screw terminal connector and the "S" stands for 3-pin shroud connector. Each 3-pin connector has one Vcc pin, one ground and one signal pin. According to different applications, the users can choose suitable modules. The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC, PAC and PLC easily. Further information about the networking of FR-2053/2057; refer to literature related to I-7188EF, I-8122, FRB-100/200.

Applications

• Industrial Automation
• Remote I/O control
• Wire-saving application
• Built-in Wire-saving FRnet DI/DO control

Specifications

• 2-wire cabling: CPEV 0.9 (2P twisted-pair cable), When different cables are used, the transmission distance may change.
• Power consumption: 2.0 W (Max.)
• Operating temperature: -25¢XC to +75¢XC
• Operating humidity: 10% ~ 95% RH, non-condensing
• Storage temperature: -30¢XC to +85¢XC
• Storage humidity: 5% ~ 95% RH, non-condensing
• Weight: approximately 120g
• Dimensions: 99 mm x 32 mm x 83 mm
• Output method: Isolated type NPN transistor open collector
• Output points: 16 points
• Output current: less than 30V@100mA/channel
• Load voltage: 24V max
• Turn-on delay time: less than 1.0ms
• Turn-off delay time: less than 1.5ms

Features

• Built-in Wire-saving FRnet DI/DO control
• High-speed transmission reliability
• Simple synchronization mechanism
• No software overhead on protocol processing
• Supporting broadcasting (1:n data transmission)
• Duplicating output easily
• Fixed I/O scan-time and I/O synchronization
• DIN-Rail mountable