Detailed features:

24 Form C, 10 A socketed relays, 37/50 pin, fault detecting

Features:

• 24 Form C relays
• Allows read back of relay output condition.
• Power-on reset
• All relays socketted and field replacable

Relay Specifications:

Relays: 24 SPDT, Form C
Contact Material: Silver Cadmium Oxide
Contact Rating: 10A at 28VDC, 10A at 120VAC
Operate Time: 20 mSec.
Release Time: 10 mSec.
Power required: +5V, externally supplied or from PC with CPCPOWER-10 cable (included)

Fault Detection Configuration
The /FD board utilizes 48 bits of digital I/O from the DIO series controller board. 24-bit are configured as output and set the relay conditions, while the other 24-bits are configured as inputs and are used to monitor the relay coil status.

Software:

Supported by a wide variety of digital output and digital I/O boards. Each digital I/O board includes InstaCal, installation and test software and is supported by UniversalLibrary.

Compatible Interface Boards:

CIO-SERB24 is compatible with the CIO-DIO48/96/192, CIO-DIO48H and PCI-DIO48H through C50FF-# cables and the PCI-DIO96H with the C100FF-# series cable

CIO-SERB24 is compatible with CIO-DIO24, -DIO24H and -DIO24/CTR3 using C37FF-# series cables