Broken Line Detection version of I-87018-G FEATURES: I-87018/BL/R has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87018/R is a Thermocouple Input Module with 8 channels. I-87018/R is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Serial I/O Module Analog Input Channels: 8 Differential Input Input Type: thermocouple, mV, V, or mA Voltage range: ± 15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V Current range: ±20mA Sampling rate: 10 samples/sec Bandwidth: 13.1 Hz Accuracy: ±0.05% or better Zero drift: ± 0.033 ppm/°J CMR @ 50/60 Hz: 150 dB NMR @ 50/60 Hz: 100 dB Span drift: 25ppm/°J Over voltage protection: ±35V

2 channel counter / frequency module FEATURES: I-87082 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87082 is a counter / frequency module with 2 input and 2 output channels. It's input mode is Isolated or non-isolated Programmable. I-87082 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility. SPECIFICATIONS: Counter channel : 2 Input Frequency : 100Khz(1Hz~100Khz) Counter Input Channels: 2 independent 32-bit counters Display : 1 LED as Power/Communication indicator 8 LEDs as status indicators Input frequency: 100K H z max. Input mode: Isolated or non-isolated Isolation input levels: Logic level 0:+1V max. Logic level 1: +3.5 to 30V Frequency Measurement Range: 1Hz to 100 K Hz Isolation voltage: 3750Vrms Programmable built-in gate time: 1.0/0.1sec Non-Isolation input level: Programmable threshold voltage Logic level 0: 0 to +5V (Default 0.8V) Logic level 1: 0 to +5V (Default 2.4V) Digital Output: Output Channel: 2 Open Collector Sink Current: 30mA maximum Power Dissipation: 300mW maximum Maximum count: 32-bit Power consumption : 1 W Programmable digital noise filter: 2 us to 65 ms Alarming mode selectable: Programmable digital noise filter: 2 us to 65 ms Alarming mode selectable: Two step high alarm comparator on counter 1 High alarm comparator on counter 0 and counter 1