3U CompactPCI 1-Slot width CRT/LCD VGA module CPU:Socket370 FC-PGA supports Intel Celeron up to 733MHz or Pentium III up to 850MHzFSB:66/100MHzCache:Subject to CPUChipset:Intel 440BX AGPset, Intel 82443BX and 82371EB(PIIX4E)BIOS:Award BIOSMemory:One 144-pin SO-DIMM socket supports up to 256MB un-buffered SDRAM, ECC supportedIDE Interface:Two 44-pin bus master EIDE interfaces support up to four IDE devices; HDD, ATAPI CD-ROM, LS120, ZIP and Flash Disk Drives; PIO mode 3/4 or Ultra DMA/33 IDE devices supportedUSB Ports:Two USB ports on the front panel, USB Specification Rev. 1.1 compliant and individual over-current protection supportedParallel Port:One Bi-directional parallel port, SPP/EPP/ECP modes supportedFDD Interface:One FDD interface supports up to two floppy disk drives, 360KB/720KB/1.2MB/1.44MB/2.88MB supportedSerial Ports:Two 16C550 UARTs, one RS-232 on the front panel as COM and one selectable RS-232/422/485 on rear I/O transition module as COM2Supper I/O:Winbond W83977EFWatchdog Timer:Programmable I/O port 2Eh and 2Fh, 1~255 sec./min. timerHardware Monitoring:Winbond W83782D monitors system temperatures/fan speeds/voltagesDisplay:-SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4MB display VRAM-Dual-display and simultaneous display supported for both CRT and LCD output, RAMDAC Latch-up protection supported-High performance, power managed 3D acceleration engine-High performance, 128-bit, single clock cycle 2D drawing engine-AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant-Supports up to 1280x1024 VGA display resolution with 24-bit true color, non-interlaced-Supports up to 1600x1200 VGA display resolution with 256 color, non-interlaced under WindowsNT-One VGA display connector on the front panel and one 24-bit RGB-TFT LCD connector on rear I/O transition moduleLAN:Intel 82559 LAN controller, 10BaseT/100BaseTX EthernetPCI Bus Bridge:TI PCI2050 transparent PCI to PCI bridge, supports up to 7 PCI bus master devices on CompactPCI bus for peripheral slotsFlash Disk Supporting:IDE interface flash disksupports up to 2GB and one DiskOnChip socket supports up to 288MBMechanical:3U, 12HP width with optional slim type FDD (8HP width without FDD module) PICMG CompactPCI 2.0 rev. 2.1 compliantFront Panel LEDs and Switch:LEDs for Power status/Ethernet/IDE activity; Flush tact switch for system resetForm Factor:3U CompactPCI, 8 or 12 HP wideOperating Temperature:0 to 60 C (32 to 140 F)Storage Temperature:-20 to 70 CCertification and Test:CE, FCC; HALT (temperature and vibration stress)

3U CompactPCI Celeron/Pentium III CPU Module With VGA/LCD, Ethernet, USB, Slim HDD/FDD and DOC Interfaces CPU:Socket370 FC-PGA supports Intel Celeron up to 733MHz or Pentium III up to 850MHzFSB:66/100MHzCache:Subject to CPUChipset:Intel 440BX AGPset, Intel 82443BX and 82371EB(PIIX4E)BIOS:Award BIOSMemory:One 144-pin SO-DIMM socket supports up to 256MB un-buffered SDRAM, ECC supportedIDE Interface:Two 44-pin bus master EIDE interfaces support up to four IDE devices; HDD, ATAPI CD-ROM, LS120, ZIP and Flash Disk Drives; PIO mode 3/4 or Ultra DMA/33 IDE devices supportedUSB Ports:Two USB ports on the front panel, USB Specification Rev. 1.1 compliant and individual over-current protection supportedParallel Port:One Bi-directional parallel port, SPP/EPP/ECP modes supportedFDD Interface:One FDD interface supports up to two floppy disk drives, 360KB/720KB/1.2MB/1.44MB/2.88MB supportedSerial Ports:Two 16C550 UARTs, one RS-232 on the front panel as COM and one selectable RS-232/422/485 on rear I/O transition module as COM2Supper I/O:Winbond W83977EFWatchdog Timer:Programmable I/O port 2Eh and 2Fh, 1~255 sec./min. timerHardware Monitoring:Winbond W83782D monitors system temperatures/fan speeds/voltagesDisplay:-SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4MB display VRAM-Dual-display and simultaneous display supported for both CRT and LCD output, RAMDAC Latch-up protection supported-High performance, power managed 3D acceleration engine-High performance, 128-bit, single clock cycle 2D drawing engine-AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant-Supports up to 1280x1024 VGA display resolution with 24-bit true color, non-interlaced-Supports up to 1600x1200 VGA display resolution with 256 color, non-interlaced under WindowsNT-One VGA display connector on the front panel and one 24-bit RGB-TFT LCD connector on rear I/O transition moduleLAN:Intel 82559 LAN controller, 10BaseT/100BaseTX EthernetPCI Bus Bridge:TI PCI2050 transparent PCI to PCI bridge, supports up to 7 PCI bus master devices on CompactPCI bus for peripheral slotsFlash Disk Supporting:IDE interface flash disksupports up to 2GB and one DiskOnChip socket supports up to 288MBMechanical:3U, 12HP width with optional slim type FDD (8HP width without FDD module) PICMG CompactPCI 2.0 rev. 2.1 compliantFront Panel LEDs and Switch:LEDs for Power status/Ethernet/IDE activity; Flush tact switch for system resetForm Factor:3U CompactPCI, 8 or 12 HP wideOperating Temperature:0 to 60 C (32 to 140 F)Storage Temperature:-20 to 70 CCertification and Test:CE, FCC; HALT (temperature and vibration stress)

3U CompactPCI Celeron/Pentium III CPU Module With VGA/LCD, Ethernet, USB, Slim HDD/FDD and DOC Interfaces CPU:Socket370 FC-PGA supports Intel Celeron up to 733MHz or Pentium III up to 850MHzFSB:66/100MHzCache:Subject to CPUChipset:Intel 440BX AGPset, Intel 82443BX and 82371EB(PIIX4E)BIOS:Award BIOSMemory:One 144-pin SO-DIMM socket supports up to 256MB un-buffered SDRAM, ECC supportedIDE Interface:Two 44-pin bus master EIDE interfaces support up to four IDE devices; HDD, ATAPI CD-ROM, LS120, ZIP and Flash Disk Drives; PIO mode 3/4 or Ultra DMA/33 IDE devices supportedUSB Ports:Two USB ports on the front panel, USB Specification Rev. 1.1 compliant and individual over-current protection supportedParallel Port:One Bi-directional parallel port, SPP/EPP/ECP modes supportedFDD Interface:One FDD interface supports up to two floppy disk drives, 360KB/720KB/1.2MB/1.44MB/2.88MB supportedSerial Ports:Two 16C550 UARTs, one RS-232 on the front panel as COM and one selectable RS-232/422/485 on rear I/O transition module as COM2Supper I/O:Winbond W83977EFWatchdog Timer:Programmable I/O port 2Eh and 2Fh, 1~255 sec./min. timerHardware Monitoring:Winbond W83782D monitors system temperatures/fan speeds/voltagesDisplay:-SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4MB display VRAM-Dual-display and simultaneous display supported for both CRT and LCD output, RAMDAC Latch-up protection supported-High performance, power managed 3D acceleration engine-High performance, 128-bit, single clock cycle 2D drawing engine-AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant-Supports up to 1280x1024 VGA display resolution with 24-bit true color, non-interlaced-Supports up to 1600x1200 VGA display resolution with 256 color, non-interlaced under WindowsNT-One VGA display connector on the front panel and one 24-bit RGB-TFT LCD connector on rear I/O transition moduleLAN:Intel 82559 LAN controller, 10BaseT/100BaseTX EthernetPCI Bus Bridge:TI PCI2050 transparent PCI to PCI bridge, supports up to 7 PCI bus master devices on CompactPCI bus for peripheral slotsFlash Disk Supporting:IDE interface flash disksupports up to 2GB and one DiskOnChip socket supports up to 288MBMechanical:3U, 12HP width with optional slim type FDD (8HP width without FDD module) PICMG CompactPCI 2.0 rev. 2.1 compliantFront Panel LEDs and Switch:LEDs for Power status/Ethernet/IDE activity; Flush tact switch for system resetForm Factor:3U CompactPCI, 8 or 12 HP wideOperating Temperature:0 to 60 C (32 to 140 F)Storage Temperature:-20 to 70 CCertification and Test:CE, FCC; HALT (temperature and vibration stress)

3U CompactPCI CPU Module W/ Pentium III 600MHz CPU, 64MB RAM, CRT/LCD, Ethernet, and 4.8GB(minimum) HDD CPU:Socket370 FC-PGA supports Intel Celeron up to 733MHz or Pentium III up to 850MHzFSB:66/100MHzCache:Subject to CPUChipset:Intel 440BX AGPset, Intel 82443BX and 82371EB(PIIX4E)BIOS:Award BIOSMemory:One 144-pin SO-DIMM socket supports up to 256MB un-buffered SDRAM, ECC supportedIDE Interface:Two 44-pin bus master EIDE interfaces support up to four IDE devices; HDD, ATAPI CD-ROM, LS120, ZIP and Flash Disk Drives; PIO mode 3/4 or Ultra DMA/33 IDE devices supportedUSB Ports:Two USB ports on the front panel, USB Specification Rev. 1.1 compliant and individual over-current protection supportedParallel Port:One Bi-directional parallel port, SPP/EPP/ECP modes supportedFDD Interface:One FDD interface supports up to two floppy disk drives, 360KB/720KB/1.2MB/1.44MB/2.88MB supportedSerial Ports:Two 16C550 UARTs, one RS-232 on the front panel as COM and one selectable RS-232/422/485 on rear I/O transition module as COM2Supper I/O:Winbond W83977EFWatchdog Timer:Programmable I/O port 2Eh and 2Fh, 1~255 sec./min. timerHardware Monitoring:Winbond W83782D monitors system temperatures/fan speeds/voltagesDisplay:-SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4MB display VRAM-Dual-display and simultaneous display supported for both CRT and LCD output, RAMDAC Latch-up protection supported-High performance, power managed 3D acceleration engine-High performance, 128-bit, single clock cycle 2D drawing engine-AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant-Supports up to 1280x1024 VGA display resolution with 24-bit true color, non-interlaced-Supports up to 1600x1200 VGA display resolution with 256 color, non-interlaced under WindowsNT-One VGA display connector on the front panel and one 24-bit RGB-TFT LCD connector on rear I/O transition moduleLAN:Intel 82559 LAN controller, 10BaseT/100BaseTX EthernetPCI Bus Bridge:TI PCI2050 transparent PCI to PCI bridge, supports up to 7 PCI bus master devices on CompactPCI bus for peripheral slotsFlash Disk Supporting:IDE interface flash disksupports up to 2GB and one DiskOnChip socket supports up to 288MBMechanical:3U, 12HP width with optional slim type FDD (8HP width without FDD module) PICMG CompactPCI 2.0 rev. 2.1 compliantFront Panel LEDs and Switch:LEDs for Power status/Ethernet/IDE activity; Flush tact switch for system resetForm Factor:3U CompactPCI, 8 or 12 HP wideOperating Temperature:0 to 60 C (32 to 140 F)Storage Temperature:-20 to 70 CCertification and Test:CE, FCC; HALT (temperature and vibration stress)

3U CompactPCI CPU Module W/ Pentium III 700MHz CPU, 128MB RAM, CRT/LCD, Ethernet, and 4.8GB(minimum) HDD CPU:Socket370 FC-PGA supports Intel Celeron up to 733MHz or Pentium III up to 850MHzFSB:66/100MHzCache:Subject to CPUChipset:Intel 440BX AGPset, Intel 82443BX and 82371EB(PIIX4E)BIOS:Award BIOSMemory:One 144-pin SO-DIMM socket supports up to 256MB un-buffered SDRAM, ECC supportedIDE Interface:Two 44-pin bus master EIDE interfaces support up to four IDE devices; HDD, ATAPI CD-ROM, LS120, ZIP and Flash Disk Drives; PIO mode 3/4 or Ultra DMA/33 IDE devices supportedUSB Ports:Two USB ports on the front panel, USB Specification Rev. 1.1 compliant and individual over-current protection supportedParallel Port:One Bi-directional parallel port, SPP/EPP/ECP modes supportedFDD Interface:One FDD interface supports up to two floppy disk drives, 360KB/720KB/1.2MB/1.44MB/2.88MB supportedSerial Ports:Two 16C550 UARTs, one RS-232 on the front panel as COM and one selectable RS-232/422/485 on rear I/O transition module as COM2Supper I/O:Winbond W83977EFWatchdog Timer:Programmable I/O port 2Eh and 2Fh, 1~255 sec./min. timerHardware Monitoring:Winbond W83782D monitors system temperatures/fan speeds/voltagesDisplay:-SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4MB display VRAM-Dual-display and simultaneous display supported for both CRT and LCD output, RAMDAC Latch-up protection supported-High performance, power managed 3D acceleration engine-High performance, 128-bit, single clock cycle 2D drawing engine-AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant-Supports up to 1280x1024 VGA display resolution with 24-bit true color, non-interlaced-Supports up to 1600x1200 VGA display resolution with 256 color, non-interlaced under WindowsNT-One VGA display connector on the front panel and one 24-bit RGB-TFT LCD connector on rear I/O transition moduleLAN:Intel 82559 LAN controller, 10BaseT/100BaseTX EthernetPCI Bus Bridge:TI PCI2050 transparent PCI to PCI bridge, supports up to 7 PCI bus master devices on CompactPCI bus for peripheral slotsFlash Disk Supporting:IDE interface flash disksupports up to 2GB and one DiskOnChip socket supports up to 288MBMechanical:3U, 12HP width with optional slim type FDD (8HP width without FDD module) PICMG CompactPCI 2.0 rev. 2.1 compliantFront Panel LEDs and Switch:LEDs for Power status/Ethernet/IDE activity; Flush tact switch for system resetForm Factor:3U CompactPCI, 8 or 12 HP wideOperating Temperature:0 to 60 C (32 to 140 F)Storage Temperature:-20 to 70 CCertification and Test:CE, FCC; HALT (temperature and vibration stress)

3U CompactPCI CPU Module W/ Pentium III 850MHz CPU, 128MB RAM, CRT/LCD, Ethernet and 20GB(minimum) HDD CPU:Socket370 FC-PGA supports Intel Celeron up to 733MHz or Pentium III up to 850MHzFSB:66/100MHzCache:Subject to CPUChipset:Intel 440BX AGPset, Intel 82443BX and 82371EB(PIIX4E)BIOS:Award BIOSMemory:One 144-pin SO-DIMM socket supports up to 256MB un-buffered SDRAM, ECC supportedIDE Interface:Two 44-pin bus master EIDE interfaces support up to four IDE devices; HDD, ATAPI CD-ROM, LS120, ZIP and Flash Disk Drives; PIO mode 3/4 or Ultra DMA/33 IDE devices supportedUSB Ports:Two USB ports on the front panel, USB Specification Rev. 1.1 compliant and individual over-current protection supportedParallel Port:One Bi-directional parallel port, SPP/EPP/ECP modes supportedFDD Interface:One FDD interface supports up to two floppy disk drives, 360KB/720KB/1.2MB/1.44MB/2.88MB supportedSerial Ports:Two 16C550 UARTs, one RS-232 on the front panel as COM and one selectable RS-232/422/485 on rear I/O transition module as COM2Supper I/O:Winbond W83977EFWatchdog Timer:Programmable I/O port 2Eh and 2Fh, 1~255 sec./min. timerHardware Monitoring:Winbond W83782D monitors system temperatures/fan speeds/voltagesDisplay:-SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4MB display VRAM-Dual-display and simultaneous display supported for both CRT and LCD output, RAMDAC Latch-up protection supported-High performance, power managed 3D acceleration engine-High performance, 128-bit, single clock cycle 2D drawing engine-AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant-Supports up to 1280x1024 VGA display resolution with 24-bit true color, non-interlaced-Supports up to 1600x1200 VGA display resolution with 256 color, non-interlaced under WindowsNT-One VGA display connector on the front panel and one 24-bit RGB-TFT LCD connector on rear I/O transition moduleLAN:Intel 82559 LAN controller, 10BaseT/100BaseTX EthernetPCI Bus Bridge:TI PCI2050 transparent PCI to PCI bridge, supports up to 7 PCI bus master devices on CompactPCI bus for peripheral slotsFlash Disk Supporting:IDE interface flash disksupports up to 2GB and one DiskOnChip socket supports up to 288MBMechanical:3U, 12HP width with optional slim type FDD (8HP width without FDD module) PICMG CompactPCI 2.0 rev. 2.1 compliantFront Panel LEDs and Switch:LEDs for Power status/Ethernet/IDE activity; Flush tact switch for system resetForm Factor:3U CompactPCI, 8 or 12 HP wideOperating Temperature:0 to 60 C (32 to 140 F)Storage Temperature:-20 to 70 CCertification and Test:CE, FCC; HALT (temperature and vibration stress)

6U CompactPCI Intel Celeron/Pentium III CPU Module With VGA(815E with 4MB display cache), Triple LAN, Ultra II Wide SCSI, CompactFlash and 4 USB Interfaces CPUSocket370 FC-PGA socket supports Intel Celeron/Pentium III up to 1.3GHzFSB66/100/133MHzCache256KB for Pentium III (100/133MHz); 128K for Celeron (66/100MHz)ChipsetIntel 815E B-stepping with ICH2 chipsetsBIOSAward BIOSMemoryThree 168-pin DIMM sockets support up to 512MB un-buffered SDRAM, PC-100/133 supportedIDE InterfaceOne 44-pin (primary) EIDE connector on front CPU module, supports on-board 2.5" notebook size HDD or flash disk-Two 40-pin EIDE conectors on rear transition module, PIO Mode3/4 and Ultra DMA/33 supportedSuper I/OWinbond W83627HF (or compatible)Parallel PortTwo Bi-directional SPP/EPP/ECP modes parallel ports (Primary port on front CPU module, secondary port on rear transition module)FDD InterfaceOne FDD interface by J3 rear I/O supports two floppy frives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB.) another 34-pin FDD interface on rear I/O transition moduleSerial PortsTwo 16C550 UARTs compatible RS-232 COM ports on front CPU module. (Expendable one 16C550 UARTs compatible one RS-232 and one RS-232/422/485 selectable serial ports by using of rear transition module)USB InterfaceFour USB ports, two ports on front CPU module, another two ports on rear I/O transition module. (USB Specification Rev. 1.1 compliant)Watch-dog TimerProgrammable I/O port 2Eh and 2Fh to configure watch-dog timer, 1~255 min./sec. timerHardware MonitoringWinbond W83782D built-in W83627HF, monitors CPU temperatures/fan/system temperatures/DC VoltagesDisplay(CPCI-6780 and CPCI-6780-01)-Intel 815E build-in hyper-pipelined architecture 3D graphics engine-AGP 2X, ACPI and VESA compliant-Supports display memory up to 10MB(by sharing)-On-board 4MB display cache-1600X1200 resoluton, supports VGA rear I/OLANTwo Intel 82559 chipsets with two RJ-45 LAN ports on front CPU module, 10BaseT/100BaseTX Ethernet (Another LAN port on rear I/O transition module with ICH2 controller)SCSI(CPCI-6780-01/02 and CPCI6780RS rear I/O module are required)LSI (SYMBIOS) 53C859 Ultra II Wide SCSI controller featuring LVD by J4 rear I/OFlash Disk Interface-CompactFlash type-II socket on front CPU module by removable transition daughter board-On-board housing for 2.5" flash diskon front CPU module-DiskOnModule by 40-pin IDE port of rear I/O transition moduleMechanical6U, 8HP wide with 233mm X 160mm X 40.6mm (9.17" X 6.30" X 1.60"), including 2.5" HDDFront Panel LEDs and SwitchPower status/IDE activity/LAN/SCSI/LVD/SE LED indicators and system reset switchOperating Temperature0 to 60 C (32 to 140 F)Storage Temperature:-40 to 80 CCertificationCE, FCC, HALT (temperature and vibration stress)

6U CompactPCI Intel Celeron/Pentium III CPU Module With VGA(815E with 4MB display cache), Triple LAN, CompactFlash and 4 USB Interfaces CPUSocket370 FC-PGA socket supports Intel Celeron/Pentium III up to 1.3GHzFSB66/100/133MHzCache256KB for Pentium III (100/133MHz); 128K for Celeron (66/100MHz)ChipsetIntel 815E B-stepping with ICH2 chipsetsBIOSAward BIOSMemoryThree 168-pin DIMM sockets support up to 512MB un-buffered SDRAM, PC-100/133 supportedIDE InterfaceOne 44-pin (primary) EIDE connector on front CPU module, supports on-board 2.5" notebook size HDD or flash disk-Two 40-pin EIDE conectors on rear transition module, PIO Mode3/4 and Ultra DMA/33 supportedSuper I/OWinbond W83627HF (or compatible)Parallel PortTwo Bi-directional SPP/EPP/ECP modes parallel ports (Primary port on front CPU module, secondary port on rear transition module)FDD InterfaceOne FDD interface by J3 rear I/O supports two floppy frives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB.) another 34-pin FDD interface on rear I/O transition moduleSerial PortsTwo 16C550 UARTs compatible RS-232 COM ports on front CPU module. (Expendable one 16C550 UARTs compatible one RS-232 and one RS-232/422/485 selectable serial ports by using of rear transition module)USB InterfaceFour USB ports, two ports on front CPU module, another two ports on rear I/O transition module. (USB Specification Rev. 1.1 compliant)Watch-dog TimerProgrammable I/O port 2Eh and 2Fh to configure watch-dog timer, 1~255 min./sec. timerHardware MonitoringWinbond W83782D built-in W83627HF, monitors CPU temperatures/fan/system temperatures/DC VoltagesDisplay(CPCI-6780 and CPCI-6780-01)-Intel 815E build-in hyper-pipelined architecture 3D graphics engine-AGP 2X, ACPI and VESA compliant-Supports display memory up to 10MB(by sharing)-On-board 4MB display cache-1600X1200 resoluton, supports VGA rear I/OLANTwo Intel 82559 chipsets with two RJ-45 LAN ports on front CPU module, 10BaseT/100BaseTX Ethernet (Another LAN port on rear I/O transition module with ICH2 controller)Flash Disk Interface-CompactFlash type-II socket on front CPU module by removable transition daughter board-On-board housing for 2.5" flash diskon front CPU module-DiskOnModule by 40-pin IDE port of rear I/O transition moduleMechanical6U, 8HP wide with 233mm X 160mm X 40.6mm (9.17" X 6.30" X 1.60"), including 2.5" HDDFront Panel LEDs and SwitchPower status/IDE activity/LAN/SCSI/LVD/SE LED indicators and system reset switchOperating Temperature0 to 60 C (32 to 140 F)Storage Temperature:-40 to 80 CCertificationCE, FCC, HALT (temperature and vibration stress)