Detailed features: PCI Bus Half-Size Socket7 Intel Low Power CPU Card With LCD/CRT VGA, Lan, DOC Flash Disk and PC/104 Interfaces
CPU:
PGA socket supports Intel P54C/
P55C, AMD K5/K6/K6-2/K6-3,
Cyrix M1/M2. CPU voltage from
1.8V up to 3.5V System Chipset:
ALi M1541/1543 chipset BIOS:
Award PnP Flash BIOS System Memory:
One 168-pin DIMM socket
supports up to 256MB SDRAM Cache Memory:
L1:Subject to CPU selected
L2:On board 512KB cache Serial Ports:
One RS-232, one RS-232/422/485
selectable serial port Parallel Port:
One Bi-directional parallel port,
SPP/EPP/ECP modes supported IDE Interfaces:
One Bus master Enhanced IDE
Interface supports up to 2 Ultra
DMA-33 IDE disk devices FDD Interface:
One FDD Interface supports up to
2 floppy disk drives Keyboard/Mouse Connector:
Mini DIN connector supports PS/2
KBD or mouse (by jumper) and one
additional independent 5-pin
keyboard connector Watch-dog Timer:
I/O port 0443h to enable, 0441h to
disable, 16-level timers with timeout interval from 0 to 120 seconds Display:
C&T69000 chipset with 2MB display
VRAM; Standard 15-pin VGA CRT connector and 51-pin panel display connector supported Ethernet:
Intel 82559 controller and RJ-45
connector on board, 10BaseT/100
BaseTX Ethernet Flash Disk Socket:
DiskOnChip socket supports up to 288MB USB Interface:
Header pin USB interface supports up to two USB ports Expansion:
PC/104 connector for PC/104 and
ISA Bus expanisons Power Requirement:
Currently version is +5V and +12V; An update version will be +5V only Dimensions (L x W):
185mm x 122mm (7.2" x 4.8") Operating Temperature:
0 to 60 degree C (32 to 140 F) Storage Temperature:
-40 to 80 degree C Relative Humidity:
5% to 95%, non-condensing
Specifications:
CPU
PGA socket supports Intel P54C/ P55C, AMD K5/K6/K6-2/K6-3, Cyrix M1/M2. CPU voltage from 1.8V up to 3.5V
System Chipset
ALi M1541/1543 chipset
BIOS
Award PnP Flash BIOS
System Memory
One 168-pin DIMM socket supports up to 256MB SDRAM
Cache Memory
L1:Subject to CPU selected, L2:On board 512KB cache
Serial Ports
One RS-232, one RS-232/422/485 selectable serial port
Parallel Port
One Bi-directional parallel port, SPP/EPP/ECP modes supported
Power Requirement
Currently version is +5V and +12V; An update version will be +5V only