120/240 VAC Isolated Output Module, 5 Volt logic levels Features:Electrically equivalent to industry standard IAC/IDC/OAC & ODC solid state series Convenient DIN Rail mounting Status LEDs show module condition Low Cost Ideal for use with CB COM series, or any digital I/O board when a few high voltage/current points must be monitored and/or controlled.Specifications:Load Voltage: 120 or 240 VAC Load Current Max :5 Amps Max Line Voltage: 280 VAC On Voltage Drop: 1.6 VAC, max Off Leakage Current: 6 mA rms Module Fuse rating*: 5 A Turn-On-Time: 8.33 mS Turn-Off-Time: 8.33 mS Allowable Frequency Range: 47 to 63 Hz I/O Isolation Voltage: 4000 VAC Control On Voltage required: 3.7 VDC, min Control On Current required: 18.0 mA, max Control Off voltage: 1 VDC, max Operating Temp: -30 to 80 °C *5A fuse, BUSS model PC-TRON #PCE5

5-48 VDC Isolated Output Module, 5 Volt logic levels Features:Electrically equivalent to industry standard IAC/IDC/OAC & ODC solid state series Convenient DIN Rail mounting Status LEDs show module condition Low Cost Ideal for use with CB COM series, or any digital I/O board when a few high voltage/current points must be monitored and/or controlled. Specifications:Load Voltage: 4 to 48 V Load Current Max: 3 Amps Max Line Voltage: 60 VDC On Voltage Drop: 1.5 VDC, max Off Leakage Current: 6 mA rms Module Fuse rating*: 5 A Turn-On-Time: 0.1 mS Turn-Off-Time: 0.75 mS I/O Isolation Voltage: 4000 VAC Control On Voltage required: 3.5 VDC, min Control On Current required: 18.0 mA, max Control Off voltage: 1 VDC, max Operating Temp: -30 to 80 °C *5A fuse, BUSS model PC-TRON #PCE5

24 Channel Electromechanical Relay Accessory for Digital I/O Boards Features:24 Form C relays (ERB24) Power-on reset Also Available: For the USB-based alternative, try the USB-ERB24Relay Specifications:Relays: 24 SPDT, Form C Contact Rating: 6A at 28VDC, 5A at 120VAC Operate Time: 20 mSec. Release Time: 10 mSec. Power Consumption ERB24: 1.4A max at +5V Power required: +5V, externally supplied or from PC with CPCPOWER-10 cable (included)Software Description:Supported by a wide variety of digital output and digital I/O boards. Each digital I/O board includes InstaCal ® , installation and test software. Supported by UniversalLibrary ® . Also supported by most third party, high-level data acquisition programs.Cables / Compatible Interface Boards:CIO-ERB24 compatible with: CIO -DIO192, -DIO96, -DIO48, -DO192H, -DO96H, -DO48H with C50FF-# series cables. CIO-ERB24 and CIO-ERB08 are compatible with CIO-DIO24, -DIO24H and -DIO24/CTR3 using C37FF-# series cables

24 FormC, 6 Amp relays, 37 & 50 pin, for all CIO-DIO, detachable screw terminals Features:24 Form C relays Power-on reset Detachable screw terminalsRelay Specifications:Relays: 24 or 8 SPDT, Form C Contact Material: Silver Cadmium Oxide Contact Rating: 6A at 28VDC, 5A at 120VAC Operate Time: 20 mSec. Release Time: 10 mSec. Power Consumption: 1.4A max at +5V Power required: +5V, externally supplied or from PC with CMOLEX-10 cable (included)Software:Supported by a wide variety of digital output and digital I/O boards.Cables / Compatible Interface Boards:Compatible with: CIO -DIO192, -DIO96, -DIO48, -DO192H, -DO96H, -DO48H or PCI-DIO48H with C50FF-# series cables or the PCI-DIO96H with a C100FF-# cable Also compatible with CIO-DIO24, -DIO24H, -DIO24/CTR3, PCI-DIO24H & PCI-DIO34H/CTR3 using C37FF-# series cables. Detachable Screw Terminals The /DST versions have detachable screw terminals for all field I/O wiring.

48 Form C, 6 Amp Relays, 50 Pin Conn Features:48 Form C relays Power-on reset Compatible with a wide variety of digital output & I/O boardsRelay Specifications:Relays: 48 SPDT, FORM C Contact Rating: 6A at 28VDC, 5A at 120VAC Operate Time: 20 mSec. Release Time: 10 mSec. Power Consumption: 3.4 A max at +5V Power required: 5V, externally supplied or from PC with CMOLEX-10 cable (included)Software Description:Supported by a wide variety of digital output and digital I/O boards. Each digital I/O board includes InstaCal ® , installation and test software. Supported by UniversalLibrary ® . Also supported by most third party, high-level data acquisition programs.Cables / Compatible Interface Boards:Compatible with: CIO: -DIO192, -DIO96, -DIO48, -DO192H, -DO96H, -DO48H (Interconnect cable is C50FF-# series)

48 Form C, 10 A socketed relays, 50 pin connectors for DIO 48, 96, and 192 Features:48 Form C relays Power-on reset All relays socketted and field replacableRelay Specifications:Relays: 48 SPDT, FORM C Contact Material: Silver Cadmium Oxide Contact Rating: 10A at 28VDC, 10A at 120VAC Operate Time: 20 mSec. Release Time: 10 mSec. Power Consumption: 4.6 A max at +5V Power required: +5V, externally supplied or from PC with CPCPOWER-10 cable (included)Software:Supported by a wide variety of digital output and digital I/O boards. Each digital I/O board includes InstaCal, installation and test software and is supported by UniversalLibrary.Cables / Compatible Interface Boards:Compatible with:CIO: -DIO192, -DIO96 -DIO48, -DO192H, -DO96H, -DO48H or PCI-DIO48H with the C50FF-# cable or PCI-DIO96H with the C100FF-# series cable

8-channel solid state I/O module rack for PCI-DAS6000 series boards Features: Interfaces PCI-DAS6000 series boards to 8 Solid State I/O modules Uses industry standard modules Supports both input and output modules Simple connection to your PCI-DAS6000 board Relays sold separately

24 Solid State Relay Rack for use with CIO-DUALAC5 Features:24 channel solid-state relays Industry standard 50-pin lege connector Uses industry standard I/O modlesRelays sold separatelyDescription:The SSR-PB24 is a mounting and interface rack for use with standard size Gordos/OPTO22 solid state I/O modules. These modules provide hundreds of volts of isolation from harsh electrical environments for both digital inputs and outputs. The SSR-PB24 provides independant screw terminals for each module. The screw terminals allow you to connect signals via 12-22 AWG wire.I/O Modules:A wide variety of I/O modules are available. The I/O module''s part numbers start with the SSR prefix.Compatible Boards & Cables:CIO-DUAL-AC5 will support two SSR-PB24 racks. Each will require a C50FE-# series cable.