sdfsdf

Acquisition & Control on PC | Signal Conditioners

SSR-RACK08

SSR-RACK08

8 Channel Solid State ACC for the DIO24 Features:Provides mounting for 8 channel solid-state relays (Not included) Uses industry standard I/O modules Also Available: For the USB-based alternative, try the USB-SSR08Description:The SSR-RACK08 is a mounting and interface rack for use with standard size Gordos/OPTO22 solid state I/O modules. These modules provide 1500 volts of isolation from harsh electrical environments for both digital inputs and outputs. The SSR-RACK08 has independent screw terminals for each module. The screw terminals allow you to connect signals via 12-22 AWG wire.I/O Modules:Compatible modules are available from the SSR-OAC, SSR-ODC, SSR-IAC and SSR-IDC series.SSR-RACK08 Compatible Boards & Cables:The SSR-RACK08 is compatible with the CIO-DIO24, -DIO24H and -DIO24/CTR3 and requires a C37FF-# series cable.

$172.00

SSR-RACK08/DST

SSR-RACK08/DST

8 solid state relay (OPTO22 type) mounting rack, detachable screw terminals Features:8 channel solid-state relay module racks Uses industry standard I/O modulesDescription:The SSR-RACK8 is a mounting and interface rack for use with standard size Gordos/OPTO22 solid state I/O modules. These modules provide hundreds of volts of isolation from harsh electrical environments for both digital inputs and outputs. The SSR-RACK8 has independant screw terminals for each module. The screw terminals allow you to connect signals via 12-22 AWG wire.Power Requirements:+5V, externally supplied or from PC with CMOLEX-10 cableCompatible Boards & Cables:CIO-DIO24, -DIO24H and -DIO24/CTR3 and PCI-DIO24H, and DIO24h/CTR3 with a C37FF-# series cable.

$213.00

SSR-RACK24

SSR-RACK24

24 Position Solid State Relay rack. Features:Mounting rack for 24 solid-state relays Uses industry standard I/O modules Also Available: For the USB-based alternative, try the USB-SSR24Description:The SSR-RACK24 is a mounting and interface rack for use with standard size Gordos/OPTO22 solid state I/O modules. These modules provide 1500volts of isolation from harsh electrical environments for both digital inputs and outputs. On board TTL level drivers provide the necessary drive current to control any compatible 5 volt solid state relay. The SSR-RACK24 has independent screw terminals for each module. The screw terminals allow you to connect signals via 12-22 AWG wire. I/O Modules:Compatible modules are available from the SSR-OAC, SSR-ODC, SSR-IAC and SSR-IDC series. SSR-RACK24 Compatible Boards & Cables:CIO-DIO192, 96, 48, CIO-DO192, 96, 48, and CIO-DI192, 96 and 48 use C50FF-# cables. The CIO-DIO24, -DIO24H and -DIO24/CTR3 require C37FF-# series cables.

$324.00

SSR-RACK24/DST

SSR-RACK24/DST

24 solid state relay (OPTO22 type) mounting rack, detachable screw terminals Features:24 channel solid-state relay module racks Uses industry standard I/O modulesDescription:The SSR-RACK24 is a mounting and interface rack for use with standard size Gordos/OPTO22 solid state I/O modules. These modules provide hundreds of volts of isolation from harsh electrical environments for both digital inputs and outputs. The SSR-RACK24 has independant screw terminals for each module. The screw terminals allow you to connect signals via 12-22 AWG wire.Power Requirements:+5V, externally supplied or from PC with CMOLEX-10 cableCompatible Boards & Cables:CIO-DIO192, 96, 48, CIO-DO192, 96, 48, and CIO-DI192, 96 and 48 and the PCI-DIO48H & 96H with C50FF-# cables. The CIO-DIO24, -DIO24H -DIO24/CTR3 and PCI-DIO24H and -DIO24H/CTR# require C37FF-# series cables.

$424.00

SSR-RACK48

SSR-RACK48

48 Solid State Rack Quad Module 50P Conn Features: 48 channel solid-state relay module rack Uses industry standard quad-format modules Very high density Description:The SSR-RACK48 is a high density mounting and interface rack for use with quad type solid state relays. The SSR-RACK48 is the perfect means of interfacing quad solid state relays (SSR) modules to any 48, 96 or 192 line digital I/O board with 50 pin connectors. Providing positions for 12 quad relays, the SSR-RACK48 has screw terminals for each module. The screw terminals allow you to connect signals via 12-22 AWG wire. The signals are routed through the SSRs to the 50 pin, 48 line connector.I/O Modules:A wide variety of compatible, quad I/O modules are available. These modules use a SSR-4 prefix.Power Requirements:+5V, externally supplied or from PC with CPCPOWER-10 cableCompatible I/O Boards & Cables:CIO-DIO192, 96, 48, CIO-DO192, 96, 48, and CIO-DI192, 96 and 48. All require a C50FF-# series cable .

$434.00

SSR-RACK48/DST

SSR-RACK48/DST

48 solid state relay (QUAD type) mounting rack, detachable screw terminals Features:48 channel solid-state relay module rack Uses industry standard quad-format modules Very high densityDescription:The SSR-RACK48 is a high density mounting and interface rack for use with quad type solid state relays. The SSR-RACK48 is the perfect means of interfacing quad solid state relays (SSR) modules to any 48, 96 or 192 line digital I/O board with 50 pin connectors. Providing positions for 12 quad relays, the SSR-RACK48 has screw terminals for each module. The screw terminals allow you to connect signals via 12-22 AWG wire. The signals are routed through the SSRs to the 50 pin, 48 line connector.Power Requirements:+5V, externally supplied or from PC with CMOLEX-10 cableCompatible Interface Boards:CIO-ERB48/DST is compatible with the CIO-DIO48/96/192, CIO-DIO48H and PCI-DIO48H through C50FF-# cables and the PCI-DIO96H with the C100FF-# series cable

$552.00

SSR-4-IAC-05

SSR-4-IAC-05

Quad Vac In (90-140) Features:Four inputs per module 4000 Vrms isolation Low costSpecifications:# of inputs: 4 Input Voltage: 90 to 140 VAC Input Current (max): 10 mA Input Resistance: 14 Kohm Turn-on Time: 20 mS Turn-off Time: 30 mS Supply Current: 10 mACompatibility Guide:Installs on SSR-RACK48 board SSR-RACK48 compatible with: Digital I/O boards containing a minimum of 48 channels Cable: C50FF-# series

$88.00

SSR-4-IAC-05A

SSR-4-IAC-05A

Quad Vac In(180-280) Features:Four inputs per module 4000 Vrms isolation Low costSpecifications:# of inputs: 4 Input Voltage: 180 to 280 VAC Input Current (max): 8 mA Input Resistance: 45 Kohm Turn-on Time: 20 mS Turn-off Time: 30 mS Supply Current: 10 mACompatibility Guide:Installs on SSR-RACK48 board SSR-RACK48 compatible with: Digital I/O boards containing a minimum of 48 channels Cable: C50FF-# series

$88.00

  
 
15 
 
16 
17
 
18 
 
19 
  

Refine your search

 and / or    

Send

  My Interestsss

This is our way of making your browsing experience a success. If you have any technical questions, we will make it our pleasure to review this list and find the solution that's right for you.

  While browsing, add the products you are interested in by clicking on the add to my interest buttons.

 

Need a Solutions?

We can provide the answer!