16 Channel 16-Bit high drive for USB w/8 bits of Digital I/O Features: 16-bit, high-drive analog voltage output 8 digital I/O 32-bit event counter Includes power supply and USB cable Out-of-the-box ready—factory calibrated Includes InstaCal™, Universal Library™ & Universal Library™ for LabVIEW™ Fully supported by Measurement Studio- MCC edition, SoftWIRE®, DASYLab®, & LabVIEW™

USB based GPIB interface Features: Low cost, high performance IEEE-488.2 Standard interface Data transfer rates over 800 kbytes/sec Complete Talker/Listener/Controller Lifetime Warranty Includes GPIB-488 software library for Windows XP, Windows 2000, and LabVIEW™

Remote single channel USB temperature logger Features: Easy to use—no training required Stores 16,382 temperature reading measurements Supports -35 to +80 °C (+/- 1 °C accuracy) All software included to install, configure and download data Software includes powerful strip chart and export to Excel® Protected against moisture to IP67 standard when cap is installed Battery-operated 1-year warranty The USB-501 logs up to 16,382 temperature measurements in the -31 to +176 ºF (-35 to +80 ºC) range. Simply plug the USB-501 logger into any USB port on your PC—use the intuitive software to name the logger, set your start time and date, sample rate, units (ºC or ºF), and hi/lo alarms—and you're ready. Just place the logger on location and leave it. Status is indicated by flashing red/green and amber LEDs. When you're through collecting data, plug the logger back in the USB port, download and save the data to your hard drive, display the data in a powerful strip chart, and/or export your data to an Excel® spreadsheet! All software and utilities are bundled with the USB-501 hardware!

Remote temperature and humidity logger Features: Easy to use—no training required Stores 16,382 temperature reading and 16,382 relative humidity measurements < Supports -35 to +80 °C (+/- 1 °C accuracy) Supports 0 to 100% relative humidity All software included to install, configure and download data Software includes powerful strip chart and export to Excel® Protected against moisture to IP67 standard when cap is installed Battery-operated 1-year warranty The USB-502 logs up to 16,382 temperature and 16,382 relative humidity measurements concurrently. Simply plug the USB-502 logger into any USB port on your PC—use the intuitive software to name the logger, set your start time and date, sample rate, units (ºC or ºF), and hi/lo alarms—and you're ready. Just place the logger on location and leave it. Status is indicated by flashing red/green and amber LEDs. When you're through collecting data, plug the logger back in the USB port, download and save the data to your hard drive, display the data in a powerful strip chart, and/or export your data to an Excel® spreadsheet! All software and utilities are bundled with the USB-502 hardware!

8 Channel Thermocouple Logger with Alarming Features: 8 thermocouple input channels Supports J, K, R, S, T, N, E, & B type thermocuples Superior performance—accuracy exceeds sensor output Includes 512-MB CompactFlash® card & USB power adaptor 8 digital I/O bits; user-configurable in internal memory for alarming Includes InstaCal™, TracerDAQ™, Universal Library™ & Universal Library™ for LabVIEW™ Fully supported by SoftWIRE®, DASYLab®, & LabVIEW™

8 Channel Temperature Logger with Alarming Features: 8 temperature input channels Supports thermcouples, RTDs, thermistors and semiconductor temperature devices Superior performance—accuracy exceeds sensor output Includes 512-MB CompactFlash® card & USB power adaptor 8 digital I/O bits; user-configurable for alarming Includes InstaCal™, TracerDAQ™, Universal Library™ & Universal Library™ for LabVIEW™ Fully supported by SoftWIRE®, DASYLab®, & LabVIEW™

Same performance as USB-1024LS w/37-pin D-sub connector, no case Hardware: 24 bits DIO Based on industry standard 82C55 One 32-bit external event counter 37-pin connector matches PCI-DIO24 Software: Included with hardware: TracerDAQTM Universal Library LabVIEWTM drivers and VIs SoftWIRE® eval. version Fully supported by: SoftWIRE® DASYLab®

Same performance as USB-1024HLS w/37-pin D-sub connector, no case Hardware: 24 bits DIO High current outputs (15mA source, 64mA sink) One 32-bit external event counter 37-pin connector matches PCI-DIO24H connector USB 1.1 & 2.0 compatible device supported under Microsoft Windows 98SE/ME/2000/XP Software: Included with hardware: TracerDAQTM Universal Library LabVIEWTM drivers and VIs SoftWIRE® eval. version Fully supported by: SoftWIRE® DASYLab®