Same performance as USB-DIO96H w/2 50-pin connectors, no screw terms. Hardware: 96 digital I/O bits High output currents (24 mA source, 64 mA sink) 50-pin connectors match PCI-DIO96H connectors Rugged steel enclosure with three mounting options (details/dimensions) Software: Included with hardware: TracerDAQTM Universal Library LabVIEWTM drivers and VIs SoftWIRE® eval. version Fully supported by: Measurement Studio—MCC Edition DASYLab® SoftWIRE®

Same performance as USB-PDISO8 w/40-pin connector, no screw terms. Hardware: Integrated signal conditioning 8 Isolated digital inputs (24 VAC or VDC) 8 Form-C relays (6 Amps @ 240 VAC/28 VDC contact ratings) 40-pin connector matches PCI-PDISO8 connector Exclusive built-in USB expansion port allows daisy-chaining of multiple units Software: Included with hardware: TracerDAQTM Universal Library LabVIEWTM drivers and VIs SoftWIRE® eval. version Fully supported by: SoftWIRE® DASYLab®

US Plug for USB Power Adapter (included w/USB Power Adapter)

The USB-1602HS is a multifunction high-speed measurement and control board supported under popular Microsoft® Windows® operating systems. It features Two single-ended 16-bit analog inputs, with one A/D converter per channel and a maximum sampling rate of 2 MHz per channel. The input range is software programmable for ±10 V, ±2.5 V, or ±500 mV. It also has 16 synchronous digital inputs and 16 synchronous digital outputs; four 16-bit or 32-bit counters (which can be configured to be gated); two timer/pulse width modulation (PWM) generators; and three 16-bit or 32-bit quadrature detectors to measure linear and rotary position.

The USB-1602HS-2AO is a multifunction high-speed measurement and control board supported under popular Microsoft® Windows® operating systems. It features four single-ended 16-bit analog inputs, with one A/D converter per channel and a maximum sampling rate of 2 MHz per channel. The input range is software programmable for ±10 V, ±2.5 V, or ±500 mV. It also has two synchronous 16-bit ±10 V analog outputs, which can generate waveforms at up to 1MHz per channel; 16 synchronous digital inputs and 16 synchronous digital outputs; four 16-bit or 32-bit counters (which can be configured to be gated); two timer/pulse width modulation (PWM) generators; and three 16-bit or 32-bit quadrature detectors to measure linear and rotary position.

The USB-502-PLUS data logger measures and stores up to 16,382 relative humidity and 16,382 temperature readings over 0 to 100% RH, and -35 to +80 °C (-31 to +176 °F) ranges. The user can easily set up the logging rate and start-time, download the stored data by plugging the module straight into a PC’s USB port, and run the purpose-designed software under Windows2000/XP/Vista (32-bit). Relative humidity, temperature, and dew point (the temperature at which water vapor in the air begins to condense) data can then be graphed, printed and exported to Excel. The data logger is supplied complete with a long-life lithium battery, which will last for up to a full year. Logger status is indicated by two flashing green/red LEDs. The data logger is protected against dust/moisture ingress to IP67 when the protective cap is fitted. Easy to use—no training required All software included to install, configure and download data Software includes powerful strip chart and export to Excel® Protected against moisture to IP67 standard when cap is installed Battery-operated 1-year warranty Immediate and delayed-start logging modes Software configurable data rollover: Allows unlimited logging periods by overwriting the oldest data when the memory is full Temperature: -35 to +80 °C range, ±0.1 °C repeatability, ±0.3°C accuracy Dew point: ±1.1 °C accuracy (25 °C, 40–100 %RH) Relative humidity: 0–100 % range, ±0.1 % repeatability, ±2.0 % accuracy (20–80 %RH) Stores 16,382 temperature readings and 16,382 relative humidity measurements

24-bit, 100 S/s simultaneous sampling, 250 VAC isolation, universal analog input device. Measure voltage (up to ±60 V), current, temperature, or strain with one easy-to-use module Key Highlights 24-bit resolution Four channels of universal analog input Built-in thermistor for cold-junction compensation (CJC) Six-position spring terminal allows different measurement types to be performed on each channel Measures: voltage (±125 mV, ±1 V, ±4 V, ±15 V, ±60 V), current (±25 mA), thermocouples (J, K, R, S, T, N, E, B type), RTDs (Pt100, Pt1000, 3-wire and 4-wire), resistance (2-wire and 4-wire), and bridge-based sensors (quarter-, half-, and full-bridge) Simultaneous sampling at up to 100 S/s per channel Includes InstaCal™, TracerDAQ®, and Universal Library - powerful software for both programmers and non-programmers, to have you up and running quickly

Measurement Computing's USB-2404-10 is a high-speed USB device featuring four 24-bit simultaneous analog inputs with a sampling rate of 50 kS/s per channel, and a ±10V input voltage range. The USB-2404-10 is fully compatible with both USB 1.1 and USB 2.0 ports. An anti-alias filter removes noise that may be present in the signals prior to conversion. Full 250 Vrms channel-to-channel and channel-to-ground isolation protects the module and computer from ground spikes, and ensures a reliable data stream. An on-board LED indicates the status of the device. Field connections are made to four 2-pole, detachable screw terminals. The USB 2.0 high-speed driver transfers data at rates up to 480 Mbps. Power for the USB-2404-10 comes from the +5 volt USB supply from your computer. No external power is required. Simultaneous sampling Four 24-bit analog inputs 50 kS/s per channel sampling rate 250 Vrms channel-to-channel and channel-to-ground isolation Four 2-pole, detachable screw terminals ±10 V input range No external power supply required