8MB Flash FEATURES: (For 7188XA,7188XB,7188XC,7188XG,7188EX,7188EG) SPECIFICATIONS: Flash Memory Memory size : 8 M Bytes Endurance : 1,000,000 Program/Erase Cycles Data Retention : 10 year Power consumption : 0.4 W

128KB NV-SRAM (For 7188XA,7188XB,7188XC,7188XG,7188EX,7188EG) Introduction The power supply of SRAM is selected from the highest voltage of I-7188 (VCC). The initial voltage of battery is about 3V. If the I-7188 is power on, the I-7188 series (VCC) will be about 5V. If the I-7188 is off, the I-7188 (VCC) will be about 0V. So when the I-7188 is power on, the I-7188 (VCC) will supply power to SRAM. In this condition, battery will preserve their battery for later usage. If I-7188¡¦s power is off, the battery with higher voltage will supply power to SRAM. The stored data of SRAM will remain if the power is larger then 2.0V. When I-7188¡¦s power is off, the power control circuit will select the battery with higher voltage to backup SRAM. The X607 can replace with new batteries, but the data stored in SRAM will be lost. The X607 can provide between seven and eight years ( Shutdown 24 hours everyday) of backup time over a nine years period. SRAM Memory Memory size : 128K Bytes Battery backup : Yes (10 years) Power consumption : 0.5 W

512KB NV-SRAM (For 7188XA,7188XB,7188XC,7188XG,7188EX,7188EG) Introduction The power supply of SRAM is selected from the highest voltage of I-7188 (VCC). The initial voltage of battery is about 3V. If the I-7188 is power on, the I-7188 series (VCC) will be about 5V. If the I-7188 is off, the I-7188 (VCC) will be about 0V. So when the I-7188 is power on, the I-7188 (VCC) will supply power to SRAM. In this condition, battery will preserve their battery for later usage. If I-7188¡¦s power is off, the battery with higher voltage will supply power to SRAM. The stored data of SRAM will remain if the power is larger then 2.0V. When I-7188¡¦s power is off, the power control circuit will select the battery with higher voltage to backup SRAM. The X608 can replace with new batteries, but the data stored in SRAM will be lost. The X608 can provide between three and five years ( Shutdown 24 hours everyday) of backup time over a nine years period. SRAM Memory Memory size : 512K Bytes Battery backup : Yes (10 years)

2-axis Encoder Module FEATURES: (For 7188XB,7188XG,7188EX,7188EG) SPECIFICATIONS: 2-axis encoder counter 24-bit encoder counter Encoder mode: Quadrant ,CW/CCW , Pulse/Direction Maximum counting rate:1MHz Input 5V Logic High: 3.5V~5V Logic Low : 0V~2V Input 12V with external resistor 1K ohm Logic High: 5V~12V Logic Low : 0V~2V Input 24V with external resistor 2K ohm Logic High: 7V~24V Logic Low : 0V~2V Built-in XOR logic for active high or low Isolated voltage output: +5V,100 mA(max)

2-axis Encoder Module FEATURES: (For 7188XB,7188XG,7188EX,7188EG) SPECIFICATIONS: 2-axis encoder counter 24-bit encoder counter Encoder mode: Quadrant ,CW/CCW , Pulse/Direction Maximum counting rate:1MHz Input 5V Logic High: 3.5V~5V Logic Low : 0V~2V Input 12V with external resistor 1K ohm Logic High: 5V~12V Logic Low : 0V~2V Input 24V with external resistor 2K ohm Logic High: 7V~24V Logic Low : 0V~2V Built-in XOR logic for active high or low Isolated voltage output: +5V,100 mA(max)

3-slot 300 Tags InduSoft Embedded Controller The WinCON W-8x36 series takes full advantage of both Indusoft’s "Web-Ready" HMI suite, and ISaGRAF’s powerful IEC-1131 programming suite! With a W-8x36 WinCON, users can comfortably integrate powerful, web-based SCADA applications; allowing for cutting edge remote HMI possibilities, as well as comfortably integrate programs developed in any one of the IEC-61131-3 based languages, including: Sequential function chart, Function block diagram, Structured text, Instruction list, Ladder diagram, and flow chart.! The W-8x36 provides the ultimate, no compromise solution for robust automation applications! For additional information regarding ISaGRAF & Indusoft, Robust Intel Strong ARM CPU Microsoft Windows CE.net RTOS built-in Indusoft "Web-Ready" runtime built in ISaGRAF 3.x runtime built in IEC-61131-3 language compatible Fully capable of supporting USB/PS2/Ethernet based devices VGA interface OPC server supported Built-in serial RS-232/485 ports Built-in 10/100** BaseT Ethernet stack (**10/100ports available in W-8x4x only) Real-time transmission as multicast server via iPush Embedded Various access target such as Excel, mobile phone, PDA,terminals PLC-style, expandable I/O Direct backplane access to I/O Wide range of I/O modules: DI, DO, AI, AO, Counter/Frequency, Motion control...etc. Universal fieldbus supported CAN bus network supported Industrial Modbus/TCP, Modbus/RTU protocol supported Ladder script development tools Built-in Http, FTP, Telnet, SSH, and SFTP servers Built-in MySQL database engine

7-slot 1500 Tags InduSoft Embedded Controller The WinCON W-8x36 series takes full advantage of both Indusoft’s "Web-Ready" HMI suite, and ISaGRAF’s powerful IEC-1131 programming suite! With a W-8x36 WinCON, users can comfortably integrate powerful, web-based SCADA applications; allowing for cutting edge remote HMI possibilities, as well as comfortably integrate programs developed in any one of the IEC-61131-3 based languages, including: Sequential function chart, Function block diagram, Structured text, Instruction list, Ladder diagram, and flow chart.! The W-8x36 provides the ultimate, no compromise solution for robust automation applications! For additional information regarding ISaGRAF & Indusoft, Robust Intel Strong ARM CPU Microsoft Windows CE.net RTOS built-in Indusoft "Web-Ready" runtime built in ISaGRAF 3.x runtime built in IEC-61131-3 language compatible Fully capable of supporting USB/PS2/Ethernet based devices VGA interface OPC server supported Built-in serial RS-232/485 ports Built-in 10/100** BaseT Ethernet stack (**10/100ports available in W-8x4x only) Real-time transmission as multicast server via iPush Embedded Various access target such as Excel, mobile phone, PDA,terminals PLC-style, expandable I/O Direct backplane access to I/O Wide range of I/O modules: DI, DO, AI, AO, Counter/Frequency, Motion control...etc. Universal fieldbus supported CAN bus network supported Industrial Modbus/TCP, Modbus/RTU protocol supported Ladder script development tools Built-in Http, FTP, Telnet, SSH, and SFTP servers Built-in MySQL database engine

7-slot 300 Tags InduSoft Embedded Controller The WinCON W-8x36 series takes full advantage of both Indusoft’s "Web-Ready" HMI suite, and ISaGRAF’s powerful IEC-1131 programming suite! With a W-8x36 WinCON, users can comfortably integrate powerful, web-based SCADA applications; allowing for cutting edge remote HMI possibilities, as well as comfortably integrate programs developed in any one of the IEC-61131-3 based languages, including: Sequential function chart, Function block diagram, Structured text, Instruction list, Ladder diagram, and flow chart.! The W-8x36 provides the ultimate, no compromise solution for robust automation applications! For additional information regarding ISaGRAF & Indusoft, Robust Intel Strong ARM CPU Microsoft Windows CE.net RTOS built-in Indusoft "Web-Ready" runtime built in ISaGRAF 3.x runtime built in IEC-61131-3 language compatible Fully capable of supporting USB/PS2/Ethernet based devices VGA interface OPC server supported Built-in serial RS-232/485 ports Built-in 10/100** BaseT Ethernet stack (**10/100ports available in W-8x4x only) Real-time transmission as multicast server via iPush Embedded Various access target such as Excel, mobile phone, PDA,terminals PLC-style, expandable I/O Direct backplane access to I/O Wide range of I/O modules: DI, DO, AI, AO, Counter/Frequency, Motion control...etc. Universal fieldbus supported CAN bus network supported Industrial Modbus/TCP, Modbus/RTU protocol supported Ladder script development tools Built-in Http, FTP, Telnet, SSH, and SFTP servers Built-in MySQL database engine